26 : target_coords(0, 0, 0), target_frame_id(
"map")
36 "target_coords = (%.03f,%.03f,%.03f deg)\n", target_coords.x,
37 target_coords.y, target_coords.phi);
38 s +=
mrpt::format(
"target_frame_id = \"%s\"\n", target_frame_id.c_str());
39 s +=
mrpt::format(
"targetAllowedDistance = %.03f\n", targetAllowedDistance);
41 "targetIsRelative = %s\n", targetIsRelative ?
"YES" :
"NO");
43 "targetIsIntermediaryWaypoint = %s\n",
44 targetIsIntermediaryWaypoint ?
"YES" :
"NO");
45 s +=
mrpt::format(
"targetDesiredRelSpeed = %.02f\n", targetDesiredRelSpeed);
64 s +=
"navparams. Single target:\n";
65 s += target.getAsText();
73 return (rhs !=
nullptr) && (this->target == rhs->target);
158 "CAbstractNavigator",
"enable_time_profiler",
196 "[CAbstractNavigator::navigationStep()] Navigation " 224 "[CAbstractNavigator::navigationStep()] Stopping " 225 "Navigation due to a NAV_ERROR state!");
272 std::string(
"doEmergencyStop called for: ") + msg;
292 params->target.targetDesiredRelSpeed >= .0 &&
293 params->target.targetDesiredRelSpeed <= 1.0);
332 const double robot_time_secs =
336 const double MIN_TIME_BETWEEN_POSE_UPDATES = 20e-3;
339 const double last_call_age =
341 if (last_call_age < MIN_TIME_BETWEEN_POSE_UPDATES)
345 "updateCurrentPoseAndSpeeds: ignoring call, since last call " 346 "was only %f ms ago.",
347 last_call_age * 1e3);
365 "ERROR calling m_robot.getCurrentPoseAndSpeeds, stopping robot " 366 "and finishing navigation");
375 "ERROR calling m_robot.getCurrentPoseAndSpeeds, stopping robot " 376 "and finishing navigation");
377 throw std::runtime_error(
378 "ERROR calling m_robot.getCurrentPoseAndSpeeds, stopping robot " 379 "and finishing navigation");
386 const bool changed_frame_id =
390 if (changed_frame_id)
449 dist_to_target_for_sending_event,
450 "Default value=0, means use the `targetAllowedDistance` passed by the " 451 "user in the navigation request.");
453 alarm_seems_not_approaching_target_timeout,
454 "navigator timeout (seconds) [Default=30 sec]");
456 dist_check_target_is_blocked,
457 "When closer than this distance, check if the target is blocked to " 458 "abort navigation with an error. [Default=0.6 m]");
460 dist_to_target_for_sending_event,
461 "Default value=0, means use the `targetAllowedDistance` passed by the" 462 " user in the navigation request.");
464 alarm_seems_not_approaching_target_timeout,
465 "navigator timeout (seconds) [Default=30 sec]");
467 dist_check_target_is_blocked,
468 "When closer than this distance, check if the target is blocked to " 469 "abort navigation with an error. [Default=0.6 m]");
471 hysteresis_check_target_is_blocked,
472 "How many steps should the condition for dist_check_target_is_blocked " 473 "be fulfilled to raise an event");
480 return typeid(a) ==
typeid(b) && a.
isEqual(b);
486 return (targetDist < m_navigationParams->target.targetAllowedDistance);
500 bool call_virtual_nav_method)
508 "[CAbstractNavigator::navigationStep()] Starting Navigation. " 509 "Watchdog initiated...\n");
512 "[CAbstractNavigator::navigationStep()] Navigation " 545 const double targetDist = seg_robot_mov.
distance(
566 "Navigation target (%.03f,%.03f) was reached\n",
598 .alarm_seems_not_approaching_target_timeout)
601 "Timeout approaching the target. Aborting navigation.");
606 "Timeout approaching the target. Aborting navigation.");
625 const bool send_event =
634 "Target seems to be blocked by obstacles. Invoking" 635 " sendCannotGetCloserToBlockedTargetEvent().");
639 sendCannotGetCloserToBlockedTargetEvent,
653 if (call_virtual_nav_method)
658 catch (
const std::exception& e)
665 std::string(
"Exception: ") + std::string(e.what());
669 "[CAbstractNavigator::navigationStep] Exception:\n %s", e.what());
682 "[CAbstractNavigator::navigationStep] Untyped exception!");
double m_badNavAlarm_minDistTarget
For sending an alarm (error event) when it seems that we are not approaching toward the target in a w...
virtual bool stop(bool isEmergencyStop=true)=0
Stop the robot right now.
std::recursive_mutex m_nav_cs
mutex for all navigation methods
TRobotPoseVel m_curPoseVel
Current robot pose (updated in CAbstractNavigator::navigationStep() )
std::list< std::function< void(void)> > m_pending_events
Events generated during navigationStep(), enqueued to be called at the end of the method execution to...
This class implements a config file-like interface over a memory-stored string list.
virtual bool startWatchdog(float T_ms)
Start the watchdog timer of the robot platform, if any, for maximum expected delay between consecutiv...
virtual void loadConfigFile(const mrpt::config::CConfigFileBase &c)
Loads all params from a file.
#define MRPT_LOG_DEBUG(_STRING)
Use: MRPT_LOG_DEBUG("message");
double distance(const TPoint2D &point) const
Distance to point.
#define MRPT_LOG_ERROR_FMT(_FMT_STRING,...)
TPoint2D_< double > TPoint2D
Lightweight 2D point.
virtual bool stopWatchdog()
Stop the watchdog timer.
void setFrameTF(const std::weak_ptr< mrpt::poses::FrameTransformer< 2 >> &frame_tf)
Sets a user-provided frame transformer object; used only if providing targets in a frame ID different...
void logFmt(const VerbosityLevel level, const char *fmt,...) const MRPT_printf_format_check(3
Alternative logging method, which mimics the printf behavior.
void rotate(const double ang)
Transform the (vx,vy) components for a counterclockwise rotation of ang radians.
A safe way to call enter() and leave() of a mrpt::system::CTimeLogger upon construction and destructi...
std::string std::string format(std::string_view fmt, ARGS &&... args)
mrpt::system::TTimeStamp getCurrentTime()
Returns the current (UTC) system time.
#define MRPT_LOAD_CONFIG_VAR_CS(variableName, variableType)
Shortcut for MRPT_LOAD_CONFIG_VAR() for config file object named c and section string named s ...
~CAbstractNavigator() override
dtor
Base for all high-level navigation commands.
float targetAllowedDistance
(Default=0.5 meters) Allowed distance to target in order to end the navigation.
#define MRPT_LOG_THROTTLE_DEBUG_FMT(_PERIOD_SECONDS, _FMT_STRING,...)
Usage: MRPT_LOG_THROTTLE_DEBUG_FMT(5.0, "i=%u", i);
mrpt::vision::TStereoCalibParams params
virtual void sendNavigationEndEvent()
Callback: End of navigation command (reach of single goal, or final waypoint of waypoint list) ...
virtual void updateCurrentPoseAndSpeeds()
Call to the robot getCurrentPoseAndSpeeds() and updates members m_curPoseVel accordingly.
bool targetIsRelative
(Default=false) Whether the target coordinates are in global coordinates (false) or are relative to t...
virtual double getNavigationTime()
Returns the number of seconds ellapsed since the constructor of this class was invoked, or since the last call of resetNavigationTimer().
double dist_check_target_is_blocked
(Default value=0.6) When closer than this distance, check if the target is blocked to abort navigatio...
void setInterpolationMethod(TInterpolatorMethod method)
Change the method used to interpolate the robot path.
virtual void navigationStep()
This method must be called periodically in order to effectively run the navigation.
std::string pose_frame_id
map frame ID for pose
virtual bool changeSpeeds(const mrpt::kinematics::CVehicleVelCmd &vel_cmd)
Default: forward call to m_robot.changeSpeed().
virtual bool changeSpeedsNOP()
Default: forward call to m_robot.changeSpeedsNOP().
virtual bool isEqual(const TNavigationParamsBase &o) const =0
TState m_navigationState
Current internal state of navigator:
Virtual base for velocity commands of different kinematic models of planar mobile robot...
virtual void performNavigationStep()=0
To be implemented in derived classes.
bool operator==(const CAbstractNavigator::TNavigationParamsBase &, const CAbstractNavigator::TNavigationParamsBase &)
The struct for configuring navigation requests.
#define ASSERT_(f)
Defines an assertion mechanism.
CAbstractNavigator(CRobot2NavInterface &robot_interface_impl)
ctor
This class allows loading and storing values and vectors of different types from a configuration text...
TState
The different states for the navigation system.
LockHelper< T > lockHelper(T &t)
Syntactic sugar to easily create a locker to any kind of std::mutex.
2D segment, consisting of two points.
void loadFromConfigFile(const mrpt::config::CConfigFileBase &c, const std::string &s) override
This method load the options from a ".ini"-like file or memory-stored string list.
double dist_to_target_for_sending_event
Default value=0, means use the "targetAllowedDistance" passed by the user in the navigation request...
double targetDesiredRelSpeed
(Default=.05) Desired relative speed (wrt maximum speed), in range [0,1], of the vehicle at target...
virtual void onNavigateCommandReceived()
Called after each call to CAbstractNavigator::navigate()
virtual void sendNavigationStartEvent()
Callback: Start of navigation command.
bool m_rethrow_exceptions
virtual void sendNavigationEndDueToErrorEvent()
Callback: Error asking sensory data from robot or sending motor commands.
std::string target_frame_id
(Default="map") Frame ID in which target is given.
virtual void resetNavError()
Resets a NAV_ERROR state back to IDLE
std::unique_ptr< TNavigationParams > m_navigationParams
Current navigation parameters.
mrpt::system::TTimeStamp timestamp
void internal_onStartNewNavigation()
Called before starting a new navigation.
Individual target info in CAbstractNavigator::TNavigationParamsBase and derived classes.
reverse_iterator rbegin()
virtual void onStartNewNavigation()=0
Called whenever a new navigation has been started.
virtual void sendWaySeemsBlockedEvent()
Callback: No progression made towards target for a predefined period of time.
virtual void resume()
Continues with suspended navigation.
mrpt::math::TPose2D target_coords
Coordinates of desired target location.
TState m_lastNavigationState
Last internal state of navigator:
double alarm_seems_not_approaching_target_timeout
navigator timeout (seconds) [Default=30 sec]
void enable(bool enabled=true)
void setVerbosityLevel(const VerbosityLevel level)
alias of setMinLoggingLevel()
void dispatchPendingNavEvents()
const double PREVIOUS_POSES_MAX_AGE
mrpt::system::CTimeLogger m_navProfiler
Publicly available time profiling object.
This is the global namespace for all Mobile Robot Programming Toolkit (MRPT) libraries.
virtual void performNavigationStepNavigating(bool call_virtual_nav_method=true)
Factorization of the part inside navigationStep(), for the case of state being NAVIGATING.
virtual bool getCurrentPoseAndSpeeds(mrpt::math::TPose2D &curPose, mrpt::math::TTwist2D &curVelGlobal, mrpt::system::TTimeStamp ×tamp, mrpt::math::TPose2D &curOdometry, std::string &frame_id)=0
Get the current pose and velocity of the robot.
virtual void saveConfigFile(mrpt::config::CConfigFileBase &c) const
Saves all current options to a config file.
virtual bool changeSpeedsNOP()
Just like changeSpeeds(), but will be called when the last velocity command is still the preferred so...
std::string getAsText() const
Gets navigation params as a human-readable format.
void clear()
Clears the current sequence of poses.
virtual void doEmergencyStop(const std::string &msg)
Stops the robot and set navigation state to error.
virtual void processNavigateCommand(const TNavigationParams *params)
Does the job of navigate(), except the call to onNavigateCommandReceived()
#define MRPT_LOG_ERROR(_STRING)
TAbstractNavigatorParams params_abstract_navigator
void saveToConfigFile(mrpt::config::CConfigFileBase &c, const std::string &s) const override
This method saves the options to a ".ini"-like file or memory-stored string list. ...
mrpt::math::TTwist2D velLocal
bool read_bool(const std::string §ion, const std::string &name, bool defaultValue, bool failIfNotFound=false) const
TAbstractNavigatorParams()
int m_counter_check_target_is_blocked
CRobot2NavInterface & m_robot
The navigator-robot interface.
COutputLogger()
Default class constructor.
bool isEqual(const TNavigationParamsBase &o) const override
virtual bool checkCollisionWithLatestObstacles(const mrpt::math::TPose2D &relative_robot_pose) const
Checks whether the robot shape, when placed at the given pose (relative to the current pose)...
void getContent(std::string &str) const
Return the current contents of the virtual "config file".
virtual bool changeSpeeds(const mrpt::kinematics::CVehicleVelCmd &vel_cmd)=0
Sends a velocity command to the robot.
TErrorReason m_navErrorReason
iterator erase(iterator element_to_erase)
virtual void cancel()
Cancel current navegation.
#define MRPT_SAVE_CONFIG_VAR_COMMENT(variableName, __comment)
std::string error_msg
Human friendly description of the error.
bool operator==(const TargetInfo &o) const
#define MRPT_LOG_WARN(_STRING)
virtual void suspend()
Suspend current navegation.
std::weak_ptr< mrpt::poses::FrameTransformer< 2 > > m_frame_tf
Optional, user-provided frame transformer.
double m_last_curPoseVelUpdate_robot_time
mrpt::math::TTwist2D velGlobal
void insert(const mrpt::Clock::time_point &t, const pose_t &p)
Inserts a new pose in the sequence.
double timeDifference(const mrpt::system::TTimeStamp t_first, const mrpt::system::TTimeStamp t_later)
Returns the time difference from t1 to t2 (positive if t2 is posterior to t1), in seconds...
int hysteresis_check_target_is_blocked
(Default=3) How many steps should the condition for dist_check_target_is_blocked be fulfilled to rais...
virtual bool checkHasReachedTarget(const double targetDist) const
Default implementation: check if target_dist is below the accepted distance.
std::string m_last_curPoseVelUpdate_pose_frame_id
mrpt::poses::CPose2DInterpolator m_latestOdomPoses
bool m_navigationEndEventSent
Will be false until the navigation end is sent, and it is reset with each new command.
The pure virtual interface between a real or simulated robot and any CAbstractNavigator-derived class...
mrpt::system::TTimeStamp m_badNavAlarm_lastMinDistTime
mrpt::poses::CPose2DInterpolator m_latestPoses
Latest robot poses (updated in CAbstractNavigator::navigationStep() )
double phi
Orientation (rads)
std::string getAsText() const override
Gets navigation params as a human-readable format.
#define MRPT_LOG_THROTTLE_WARN(_PERIOD_SECONDS, _STRING)
#define INVALID_TIMESTAMP
Represents an invalid timestamp, where applicable.
mrpt::math::TPose2D rawOdometry
raw odometry (frame does not match to "pose", but is expected to be smoother in the short term)...
virtual bool stop(bool isEmergencyStop)
Default: forward call to m_robot.stop().
bool targetIsIntermediaryWaypoint
#define MRPT_LOG_INFO(_STRING)
virtual void navigate(const TNavigationParams *params)
Navigation request to a single target location.