MRPT  2.0.4
List of all members | Public Member Functions | Public Attributes | Protected Member Functions
mrpt::obs::CObservationIMU Class Reference

Detailed Description

This class stores measurements from an Inertial Measurement Unit (IMU) (attitude estimation, raw gyroscope and accelerometer values), altimeters or magnetometers.

The order of the values in each entry of mrpt::obs::CObservationIMU::rawMeasurements is defined as symbolic names in the enum mrpt::obs::TIMUDataIndex. Check it out also for reference on the unit and the coordinate frame used for each value.

See also
CObservation

Definition at line 111 of file CObservationIMU.h.

#include <mrpt/obs/CObservationIMU.h>

Inheritance diagram for mrpt::obs::CObservationIMU:

Public Member Functions

 CObservationIMU ()=default
 
 ~CObservationIMU () override=default
 
void set (TIMUDataIndex idx, double value)
 Sets a given data type, and mark it as present. More...
 
double get (TIMUDataIndex idx) const
 Gets a given data type, throws if not set. More...
 
bool has (TIMUDataIndex idx) const
 Returns true if the given data type is set. More...
 
void getSensorPose (mrpt::poses::CPose3D &out_sensorPose) const override
 A general method to retrieve the sensor pose on the robot. More...
 
void setSensorPose (const mrpt::poses::CPose3D &newSensorPose) override
 A general method to change the sensor pose on the robot. More...
 
void getDescriptionAsText (std::ostream &o) const override
 Build a detailed, multi-line textual description of the observation contents and dump it to the output stream. More...
 
template<class METRICMAP >
bool insertObservationInto (METRICMAP *theMap, const mrpt::poses::CPose3D *robotPose=nullptr) const
 This method is equivalent to: More...
 
void getSensorPose (mrpt::math::TPose3D &out_sensorPose) const
 A general method to retrieve the sensor pose on the robot. More...
 
void setSensorPose (const mrpt::math::TPose3D &newSensorPose)
 A general method to change the sensor pose on the robot. More...
 
std::string getDescriptionAsTextValue () const
 Return by value version of getDescriptionAsText(std::ostream&) More...
 
virtual mxArraywriteToMatlab () const
 Introduces a pure virtual method responsible for writing to a mxArray Matlab object, typically a MATLAB struct whose contents are documented in each derived class. More...
 
Delayed-load manual control methods.
virtual void load () const
 Makes sure all images and other fields which may be externally stored are loaded in memory. More...
 
virtual void unload ()
 Unload all images, for the case they being delayed-load images stored in external files (othewise, has no effect). More...
 
RTTI classes and functions for polymorphic hierarchies
mrpt::rtti::CObject::Ptr duplicateGetSmartPtr () const
 Makes a deep copy of the object and returns a smart pointer to it. More...
 

Public Attributes

mrpt::poses::CPose3D sensorPose
 The pose of the sensor on the robot. More...
 
std::vector< bool > dataIsPresent
 Each entry in this vector is true if the corresponding data index contains valid data (the IMU unit supplies that kind of data). More...
 
std::vector< double > rawMeasurements
 The accelerometer and/or gyroscope measurements taken by the IMU at the given timestamp. More...
 

Protected Member Functions

void swap (CObservation &o)
 Swap with another observation, ONLY the data defined here in the base class CObservation. More...
 
CSerializable virtual methods
uint8_t serializeGetVersion () const override
 Must return the current versioning number of the object. More...
 
void serializeTo (mrpt::serialization::CArchive &out) const override
 Pure virtual method for writing (serializing) to an abstract archive. More...
 
void serializeFrom (mrpt::serialization::CArchive &in, uint8_t serial_version) override
 Pure virtual method for reading (deserializing) from an abstract archive. More...
 
CSerializable virtual methods
virtual void serializeTo (CSchemeArchiveBase &out) const
 Virtual method for writing (serializing) to an abstract schema based archive. More...
 
virtual void serializeFrom (CSchemeArchiveBase &in)
 Virtual method for reading (deserializing) from an abstract schema based archive. More...
 

Data common to any observation

mrpt::system::TTimeStamp timestamp {mrpt::system::now()}
 The associated UTC time-stamp. More...
 
std::string sensorLabel
 An arbitrary label that can be used to identify the sensor. More...
 
mrpt::system::TTimeStamp getTimeStamp () const
 Returns CObservation::timestamp for all kind of observations. More...
 
virtual mrpt::system::TTimeStamp getOriginalReceivedTimeStamp () const
 By default, returns CObservation::timestamp but in sensors capable of satellite (or otherwise) accurate UTC timing of readings, this contains the computer-based timestamp of reception, which may be slightly different than timestamp. More...
 

RTTI stuff

using Ptr = std::shared_ptr< mrpt::obs ::CObservationIMU >
 
using ConstPtr = std::shared_ptr< const mrpt::obs ::CObservationIMU >
 
using UniquePtr = std::unique_ptr< mrpt::obs ::CObservationIMU >
 
using ConstUniquePtr = std::unique_ptr< const mrpt::obs ::CObservationIMU >
 
static const mrpt::rtti::TRuntimeClassId runtimeClassId
 
static constexpr const char * className = "mrpt::obs" "::" "CObservationIMU"
 
static const mrpt::rtti::TRuntimeClassId_GetBaseClass ()
 
static constexpr auto getClassName ()
 
static const mrpt::rtti::TRuntimeClassIdGetRuntimeClassIdStatic ()
 
static std::shared_ptr< CObjectCreateObject ()
 
template<typename... Args>
static Ptr Create (Args &&... args)
 
template<typename Alloc , typename... Args>
static Ptr CreateAlloc (const Alloc &alloc, Args &&... args)
 
template<typename... Args>
static UniquePtr CreateUnique (Args &&... args)
 
virtual const mrpt::rtti::TRuntimeClassIdGetRuntimeClass () const override
 Returns information about the class of an object in runtime. More...
 
virtual mrpt::rtti::CObjectclone () const override
 Returns a deep copy (clone) of the object, indepently of its class. More...
 

Member Typedef Documentation

◆ ConstPtr

Definition at line 113 of file CObservationIMU.h.

◆ ConstUniquePtr

using mrpt::obs::CObservationIMU::ConstUniquePtr = std::unique_ptr<const mrpt::obs :: CObservationIMU >

Definition at line 113 of file CObservationIMU.h.

◆ Ptr

A type for the associated smart pointer

Definition at line 113 of file CObservationIMU.h.

◆ UniquePtr

using mrpt::obs::CObservationIMU::UniquePtr = std::unique_ptr< mrpt::obs :: CObservationIMU >

Definition at line 113 of file CObservationIMU.h.

Constructor & Destructor Documentation

◆ CObservationIMU()

mrpt::obs::CObservationIMU::CObservationIMU ( )
default

◆ ~CObservationIMU()

mrpt::obs::CObservationIMU::~CObservationIMU ( )
overridedefault

Member Function Documentation

◆ _GetBaseClass()

static const mrpt::rtti::TRuntimeClassId* mrpt::obs::CObservationIMU::_GetBaseClass ( )
staticprotected

◆ clone()

virtual mrpt::rtti::CObject* mrpt::obs::CObservationIMU::clone ( ) const
overridevirtual

Returns a deep copy (clone) of the object, indepently of its class.

Implements mrpt::rtti::CObject.

◆ Create()

template<typename... Args>
static Ptr mrpt::obs::CObservationIMU::Create ( Args &&...  args)
inlinestatic

Definition at line 113 of file CObservationIMU.h.

◆ CreateAlloc()

template<typename Alloc , typename... Args>
static Ptr mrpt::obs::CObservationIMU::CreateAlloc ( const Alloc &  alloc,
Args &&...  args 
)
inlinestatic

Definition at line 113 of file CObservationIMU.h.

◆ CreateObject()

static std::shared_ptr<CObject> mrpt::obs::CObservationIMU::CreateObject ( )
static

◆ CreateUnique()

template<typename... Args>
static UniquePtr mrpt::obs::CObservationIMU::CreateUnique ( Args &&...  args)
inlinestatic

Definition at line 113 of file CObservationIMU.h.

◆ duplicateGetSmartPtr()

mrpt::rtti::CObject::Ptr CObject::duplicateGetSmartPtr ( ) const
inlineinherited

Makes a deep copy of the object and returns a smart pointer to it.

Definition at line 204 of file CObject.h.

References mrpt::rtti::CObject::clone().

Referenced by mrpt::obs::CRawlog::insert().

Here is the call graph for this function:
Here is the caller graph for this function:

◆ get()

double mrpt::obs::CObservationIMU::get ( TIMUDataIndex  idx) const
inline

Gets a given data type, throws if not set.

See also
has(), get()

Definition at line 144 of file CObservationIMU.h.

References ASSERTMSG_, dataIsPresent, and rawMeasurements.

◆ getClassName()

static constexpr auto mrpt::obs::CObservationIMU::getClassName ( )
inlinestatic

Definition at line 113 of file CObservationIMU.h.

◆ getDescriptionAsText()

void CObservationIMU::getDescriptionAsText ( std::ostream &  o) const
overridevirtual

◆ getDescriptionAsTextValue()

std::string CObservation::getDescriptionAsTextValue ( ) const
inherited

Return by value version of getDescriptionAsText(std::ostream&)

Definition at line 59 of file CObservation.cpp.

◆ getOriginalReceivedTimeStamp()

virtual mrpt::system::TTimeStamp mrpt::obs::CObservation::getOriginalReceivedTimeStamp ( ) const
inlinevirtualinherited

By default, returns CObservation::timestamp but in sensors capable of satellite (or otherwise) accurate UTC timing of readings, this contains the computer-based timestamp of reception, which may be slightly different than timestamp.

See also
getTimeStamp()

Reimplemented in mrpt::obs::CObservationVelodyneScan, mrpt::obs::CObservationGPS, and mrpt::obs::CObservationRotatingScan.

Definition at line 71 of file CObservation.h.

References mrpt::obs::CObservation::timestamp.

◆ GetRuntimeClass()

virtual const mrpt::rtti::TRuntimeClassId* mrpt::obs::CObservationIMU::GetRuntimeClass ( ) const
overridevirtual

Returns information about the class of an object in runtime.

Reimplemented from mrpt::obs::CObservation.

◆ GetRuntimeClassIdStatic()

static const mrpt::rtti::TRuntimeClassId& mrpt::obs::CObservationIMU::GetRuntimeClassIdStatic ( )
static

◆ getSensorPose() [1/2]

void CObservation::getSensorPose ( mrpt::math::TPose3D out_sensorPose) const
inherited

A general method to retrieve the sensor pose on the robot.

Note that most sensors will return a full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
setSensorPose

Definition at line 24 of file CObservation.cpp.

References mrpt::poses::CPose3D::asTPose().

Here is the call graph for this function:

◆ getSensorPose() [2/2]

void mrpt::obs::CObservationIMU::getSensorPose ( mrpt::poses::CPose3D out_sensorPose) const
inlineoverridevirtual

A general method to retrieve the sensor pose on the robot.

Note that most sensors will return a full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
setSensorPose

Implements mrpt::obs::CObservation.

Definition at line 153 of file CObservationIMU.h.

References sensorPose.

◆ getTimeStamp()

mrpt::system::TTimeStamp mrpt::obs::CObservation::getTimeStamp ( ) const
inlineinherited

Returns CObservation::timestamp for all kind of observations.

See also
getOriginalReceivedTimeStamp()

Definition at line 66 of file CObservation.h.

References mrpt::obs::CObservation::timestamp.

◆ has()

bool mrpt::obs::CObservationIMU::has ( TIMUDataIndex  idx) const
inline

Returns true if the given data type is set.

See also
set(), get()

Definition at line 150 of file CObservationIMU.h.

References dataIsPresent.

◆ insertObservationInto()

template<class METRICMAP >
bool mrpt::obs::CObservation::insertObservationInto ( METRICMAP *  theMap,
const mrpt::poses::CPose3D robotPose = nullptr 
) const
inlineinherited

This method is equivalent to:

map->insertObservation(this, robotPose)
Parameters
theMapThe map where this observation is to be inserted: the map will be updated.
robotPoseThe pose of the robot base for this observation, relative to the target metric map. Set to nullptr (default) to use (0,0,0deg)
Returns
Returns true if the map has been updated, or false if this observations has nothing to do with a metric map (for example, a sound observation).

See: Maps and observations compatibility matrix

See also
CMetricMap, CMetricMap::insertObservation

Definition at line 99 of file CObservation.h.

◆ load()

virtual void mrpt::obs::CObservation::load ( ) const
inlinevirtualinherited

Makes sure all images and other fields which may be externally stored are loaded in memory.

Note that for all CImages, calling load() is not required since the images will be automatically loaded upon first access, so load() shouldn't be needed to be called in normal cases by the user. If all the data were alredy loaded or this object has no externally stored data fields, calling this method has no effects.

See also
unload

Reimplemented in mrpt::obs::CObservation3DRangeScan, mrpt::obs::CObservationStereoImages, mrpt::obs::CObservationImage, and mrpt::obs::CObservationPointCloud.

Definition at line 157 of file CObservation.h.

Referenced by mrpt::maps::COctoMapBase< octomap::OcTree, octomap::OcTreeNode >::internal_build_PointCloud_for_observation().

Here is the caller graph for this function:

◆ serializeFrom() [1/2]

virtual void mrpt::serialization::CSerializable::serializeFrom ( CSchemeArchiveBase in)
inlineprotectedvirtualinherited

Virtual method for reading (deserializing) from an abstract schema based archive.

Definition at line 74 of file CSerializable.h.

References mrpt::serialization::CSerializable::GetRuntimeClass(), and THROW_EXCEPTION.

Here is the call graph for this function:

◆ serializeFrom() [2/2]

void CObservationIMU::serializeFrom ( mrpt::serialization::CArchive in,
uint8_t  serial_version 
)
overrideprotectedvirtual

Pure virtual method for reading (deserializing) from an abstract archive.

Users don't call this method directly. Instead, use stream >> object;.

Parameters
inThe input binary stream where the object data must read from.
versionThe version of the object stored in the stream: use this version number in your code to know how to read the incoming data.
Exceptions
std::exceptionOn any I/O error

Implements mrpt::serialization::CSerializable.

Definition at line 34 of file CObservationIMU.cpp.

References ASSERT_, mrpt::obs::COUNT_IMU_DATA_FIELDS, mrpt::obs::IMU_ROLL_VEL, mrpt::obs::IMU_YAW_VEL, MRPT_THROW_UNKNOWN_SERIALIZATION_VERSION, and mrpt::math::CVectorDynamic< T >::resize().

Here is the call graph for this function:

◆ serializeGetVersion()

uint8_t CObservationIMU::serializeGetVersion ( ) const
overrideprotectedvirtual

Must return the current versioning number of the object.

Start in zero for new classes, and increments each time there is a change in the stored format.

Implements mrpt::serialization::CSerializable.

Definition at line 22 of file CObservationIMU.cpp.

◆ serializeTo() [1/2]

virtual void mrpt::serialization::CSerializable::serializeTo ( CSchemeArchiveBase out) const
inlineprotectedvirtualinherited

Virtual method for writing (serializing) to an abstract schema based archive.

Definition at line 64 of file CSerializable.h.

References mrpt::serialization::CSerializable::GetRuntimeClass(), and THROW_EXCEPTION.

Here is the call graph for this function:

◆ serializeTo() [2/2]

void CObservationIMU::serializeTo ( mrpt::serialization::CArchive out) const
overrideprotectedvirtual

Pure virtual method for writing (serializing) to an abstract archive.

Users don't call this method directly. Instead, use stream << object;.

Exceptions
std::exceptionOn any I/O error

Implements mrpt::serialization::CSerializable.

Definition at line 23 of file CObservationIMU.cpp.

References out.

◆ set()

void mrpt::obs::CObservationIMU::set ( TIMUDataIndex  idx,
double  value 
)
inline

Sets a given data type, and mark it as present.

See also
has(), set()

Definition at line 137 of file CObservationIMU.h.

References dataIsPresent, and rawMeasurements.

Referenced by mrpt::ros1bridge::fromROS().

Here is the caller graph for this function:

◆ setSensorPose() [1/2]

void CObservation::setSensorPose ( const mrpt::math::TPose3D newSensorPose)
inherited

A general method to change the sensor pose on the robot.

Note that most sensors will use the full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
getSensorPose

Definition at line 31 of file CObservation.cpp.

◆ setSensorPose() [2/2]

void mrpt::obs::CObservationIMU::setSensorPose ( const mrpt::poses::CPose3D newSensorPose)
inlineoverridevirtual

A general method to change the sensor pose on the robot.

Note that most sensors will use the full (6D) CPose3D, but see the derived classes for more details or special cases.

See also
getSensorPose

Implements mrpt::obs::CObservation.

Definition at line 157 of file CObservationIMU.h.

References sensorPose.

◆ swap()

void CObservation::swap ( CObservation o)
protectedinherited

Swap with another observation, ONLY the data defined here in the base class CObservation.

It's protected since it'll be only called from child classes that should know what else to swap appart from these common data.

Definition at line 36 of file CObservation.cpp.

References mrpt::obs::CObservation::sensorLabel, and mrpt::obs::CObservation::timestamp.

Referenced by mrpt::obs::CObservationStereoImages::swap().

Here is the caller graph for this function:

◆ unload()

virtual void mrpt::obs::CObservation::unload ( )
inlinevirtualinherited

Unload all images, for the case they being delayed-load images stored in external files (othewise, has no effect).

See also
load

Reimplemented in mrpt::obs::CObservation3DRangeScan, and mrpt::obs::CObservationPointCloud.

Definition at line 164 of file CObservation.h.

◆ writeToMatlab()

virtual mxArray* mrpt::serialization::CSerializable::writeToMatlab ( ) const
inlinevirtualinherited

Introduces a pure virtual method responsible for writing to a mxArray Matlab object, typically a MATLAB struct whose contents are documented in each derived class.

Returns
A new mxArray (caller is responsible of memory freeing) or nullptr is class does not support conversion to MATLAB.

Definition at line 90 of file CSerializable.h.

Member Data Documentation

◆ className

constexpr const char* mrpt::obs::CObservationIMU::className = "mrpt::obs" "::" "CObservationIMU"
static

Definition at line 113 of file CObservationIMU.h.

◆ dataIsPresent

std::vector<bool> mrpt::obs::CObservationIMU::dataIsPresent
Initial value:
=
std::vector<bool>(mrpt::obs::COUNT_IMU_DATA_FIELDS, false)

Each entry in this vector is true if the corresponding data index contains valid data (the IMU unit supplies that kind of data).

See the top of this page for the meaning of the indices.

Definition at line 126 of file CObservationIMU.h.

Referenced by get(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CDUO3DCamera::getObservations(), has(), and set().

◆ rawMeasurements

std::vector<double> mrpt::obs::CObservationIMU::rawMeasurements
Initial value:
=
std::vector<double>(mrpt::obs::COUNT_IMU_DATA_FIELDS, 0)

The accelerometer and/or gyroscope measurements taken by the IMU at the given timestamp.

See also
dataIsPresent, CObservation::timestamp

Definition at line 133 of file CObservationIMU.h.

Referenced by mrpt::apps::RawlogGrabberApp::dump_IMU_info(), get(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CDUO3DCamera::getObservations(), set(), and mrpt::ros1bridge::toROS().

◆ runtimeClassId

const mrpt::rtti::TRuntimeClassId mrpt::obs::CObservationIMU::runtimeClassId
staticprotected

Definition at line 113 of file CObservationIMU.h.

◆ sensorLabel

std::string mrpt::obs::CObservation::sensorLabel
inherited

An arbitrary label that can be used to identify the sensor.

Definition at line 62 of file CObservation.h.

Referenced by mrpt::ros1bridge::convert(), mrpt::obs::CObservation3DRangeScan::convertTo2DScan(), mrpt::hwdrivers::CSICKTim561Eth::decodeScan(), mrpt::hwdrivers::CLMS100Eth::decodeScan(), mrpt::hwdrivers::CRaePID::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::apps::RawlogGrabberApp::dump_GPS_mode_info(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::obs::CObservationRotatingScan::fromScan2D(), mrpt::obs::CObservationRotatingScan::fromVelodyne(), mrpt::hwdrivers::CRaePID::getFullInfo(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CBoardSonars::getObservation(), mrpt::hwdrivers::CWirelessPower::getObservation(), mrpt::hwdrivers::CImpinjRFID::getObservation(), mrpt::hwdrivers::CEnoseModular::getObservation(), mrpt::hwdrivers::CBoardENoses::getObservation(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::obs::CObservation6DFeatures::serializeFrom(), mrpt::obs::CObservationPointCloud::serializeFrom(), mrpt::obs::CObservation6DFeatures::serializeTo(), mrpt::obs::CObservationPointCloud::serializeTo(), mrpt::obs::CObservation::swap(), and mrpt::ros1bridge::toROS().

◆ sensorPose

mrpt::poses::CPose3D mrpt::obs::CObservationIMU::sensorPose

The pose of the sensor on the robot.

Definition at line 120 of file CObservationIMU.h.

Referenced by mrpt::hwdrivers::CKinect::getNextObservation(), getSensorPose(), and setSensorPose().

◆ timestamp

mrpt::system::TTimeStamp mrpt::obs::CObservation::timestamp {mrpt::system::now()}
inherited

The associated UTC time-stamp.

Where available, this should contain the accurate satellite-based timestamp of the sensor reading.

See also
getOriginalReceivedTimeStamp(), getTimeStamp()

Definition at line 60 of file CObservation.h.

Referenced by mrpt::ros1bridge::convert(), mrpt::obs::CObservation3DRangeScan::convertTo2DScan(), mrpt::hwdrivers::CSICKTim561Eth::decodeScan(), mrpt::hwdrivers::CLMS100Eth::decodeScan(), mrpt::detectors::CObjectDetection::detectObjects(), mrpt::hwdrivers::CRaePID::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::ros1bridge::fromROS(), mrpt::obs::CObservationRotatingScan::fromScan2D(), mrpt::obs::CObservationRotatingScan::fromVelodyne(), mrpt::hwdrivers::CRaePID::getFullInfo(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::COpenNI2_RGBD360::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CBoardSonars::getObservation(), mrpt::hwdrivers::CWirelessPower::getObservation(), mrpt::hwdrivers::CImageGrabber_OpenCV::getObservation(), mrpt::hwdrivers::CEnoseModular::getObservation(), mrpt::hwdrivers::CBoardENoses::getObservation(), mrpt::hwdrivers::CImageGrabber_dc1394::getObservation(), mrpt::hwdrivers::CImageGrabber_FlyCapture2::getObservation(), mrpt::hwdrivers::CDUO3DCamera::getObservations(), mrpt::obs::CObservation::getOriginalReceivedTimeStamp(), mrpt::obs::CObservation::getTimeStamp(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::maps::CLandmarksMap::loadOccupancyFeaturesFrom2DRangeScan(), mrpt::maps::CLandmarksMap::loadSiftFeaturesFromImageObservation(), mrpt::maps::CLandmarksMap::loadSiftFeaturesFromStereoImageObservation(), mrpt::hwdrivers::CGPSInterface::parse_NMEA(), mrpt::apps::KFSLAMApp::Run_KF_SLAM(), mrpt::obs::CObservation6DFeatures::serializeFrom(), mrpt::obs::CObservationPointCloud::serializeFrom(), mrpt::obs::CObservation6DFeatures::serializeTo(), mrpt::obs::CObservationPointCloud::serializeTo(), mrpt::maps::CLandmarksMap::simulateBeaconReadings(), mrpt::maps::CLandmarksMap::simulateRangeBearingReadings(), mrpt::obs::CObservation::swap(), mrpt::ros1bridge::toROS(), and velodyne_scan_to_pointcloud().




Page generated by Doxygen 1.8.14 for MRPT 2.0.4 Git: 33de1d0ad Sat Jun 20 11:02:42 2020 +0200 at sáb jun 20 17:35:17 CEST 2020