MRPT  2.0.4
Classes | Functions
Interpolation, least-squares fit, splines

Detailed Description

Collaboration diagram for Interpolation, least-squares fit, splines:

Classes

class  mrpt::math::CSplineInterpolator1D
 A (persistent) sequence of (x,y) coordinates, allowing queries of intermediate points through spline interpolation, where possible. More...
 
class  mrpt::poses::CPose2DInterpolator
 This class stores a time-stamped trajectory in SE(2) (mrpt::math::TPose2D poses). More...
 
class  mrpt::poses::CPose3DInterpolator
 This class stores a time-stamped trajectory in SE(3) (CPose3D poses). More...
 
class  mrpt::poses::CPoseInterpolatorBase< DIM >
 Base class for SE(2)/SE(3) interpolators. More...
 

Functions

template<class T , class VECTOR >
mrpt::math::interpolate (const T &x, const VECTOR &ys, const T &x0, const T &x1)
 Interpolate a data sequence "ys" ranging from "x0" to "x1" (equally spaced), to obtain the approximation of the sequence at the point "x". More...
 
double mrpt::math::interpolate2points (const double x, const double x0, const double y0, const double x1, const double y1, bool wrap2pi=false)
 Linear interpolation/extrapolation: evaluates at "x" the line (x0,y0)-(x1,y1). More...
 
template<typename NUMTYPE , class VECTORLIKE >
NUMTYPE mrpt::math::spline (const NUMTYPE t, const VECTORLIKE &x, const VECTORLIKE &y, bool wrap2pi=false)
 Interpolates the value of a function in a point "t" given 4 SORTED points where "t" is between the two middle points If wrap2pi is true, output "y" values are wrapped to ]-pi,pi] (It is assumed that input "y" values already are in the correct range). More...
 
template<typename NUMTYPE , class VECTORLIKE , int NUM_POINTS = -1>
NUMTYPE mrpt::math::leastSquareLinearFit (const NUMTYPE t, const VECTORLIKE &x, const VECTORLIKE &y, bool wrap2pi=false)
 Interpolates or extrapolates using a least-square linear fit of the set of values "x" and "y", evaluated at a single point "t". More...
 
template<class VECTORLIKE1 , class VECTORLIKE2 , class VECTORLIKE3 , int NUM_POINTS = -1>
void mrpt::math::leastSquareLinearFit (const VECTORLIKE1 &ts, VECTORLIKE2 &outs, const VECTORLIKE3 &x, const VECTORLIKE3 &y, bool wrap2pi=false)
 Interpolates or extrapolates using a least-square linear fit of the set of values "x" and "y", evaluated at a sequence of points "ts" and returned at "outs". More...
 

Function Documentation

◆ interpolate()

template<class T , class VECTOR >
T mrpt::math::interpolate ( const T &  x,
const VECTOR &  ys,
const T &  x0,
const T &  x1 
)

Interpolate a data sequence "ys" ranging from "x0" to "x1" (equally spaced), to obtain the approximation of the sequence at the point "x".

If the point "x" is out of the range [x0,x1], the closest extreme "ys" value is returned.

Note
Implementation in #include <mrpt/math/interp_fit.hpp>
See also
spline, interpolate2points

Definition at line 17 of file interp_fit.hpp.

References ASSERT_, MRPT_END, and MRPT_START.

Referenced by mrpt::img::hot2rgb(), mrpt::poses::CPoseInterpolatorBase< 3 >::interpolate(), mrpt::img::jet2rgb(), and mrpt::poses::CPoseInterpolatorBase< 3 >::saveInterpolatedToTextFile().

Here is the caller graph for this function:

◆ interpolate2points()

double mrpt::math::interpolate2points ( const double  x,
const double  x0,
const double  y0,
const double  x1,
const double  y1,
bool  wrap2pi = false 
)

Linear interpolation/extrapolation: evaluates at "x" the line (x0,y0)-(x1,y1).

If wrap2pi is true, output is wrapped to ]-pi,pi] (It is assumed that input "y" values already are in the correct range).

See also
spline, interpolate, leastSquareLinearFit

Definition at line 438 of file math.cpp.

References MRPT_END, MRPT_START, THROW_EXCEPTION_FMT, and mrpt::math::wrapToPi().

Referenced by mrpt::poses::CPoseInterpolatorBase< 3 >::impl_interpolation().

Here is the call graph for this function:
Here is the caller graph for this function:

◆ leastSquareLinearFit() [1/2]

template<typename NUMTYPE , class VECTORLIKE , int NUM_POINTS = -1>
NUMTYPE mrpt::math::leastSquareLinearFit ( const NUMTYPE  t,
const VECTORLIKE &  x,
const VECTORLIKE &  y,
bool  wrap2pi = false 
)

Interpolates or extrapolates using a least-square linear fit of the set of values "x" and "y", evaluated at a single point "t".

The vectors x and y must have size >=2, and all values of "x" must be different. If wrap2pi is true, output "y" values are wrapped to ]-pi,pi] (It is assumed that input "y" values already are in the correct range).

See also
spline
getRegressionLine, getRegressionPlane
Note
Implementation in #include <mrpt/math/interp_fit.hpp>

Definition at line 119 of file interp_fit.hpp.

References ASSERT_, MRPT_END, MRPT_START, and mrpt::math::wrapToPi().

Here is the call graph for this function:

◆ leastSquareLinearFit() [2/2]

template<class VECTORLIKE1 , class VECTORLIKE2 , class VECTORLIKE3 , int NUM_POINTS = -1>
void mrpt::math::leastSquareLinearFit ( const VECTORLIKE1 &  ts,
VECTORLIKE2 &  outs,
const VECTORLIKE3 &  x,
const VECTORLIKE3 &  y,
bool  wrap2pi = false 
)

Interpolates or extrapolates using a least-square linear fit of the set of values "x" and "y", evaluated at a sequence of points "ts" and returned at "outs".

If wrap2pi is true, output "y" values are wrapped to ]-pi,pi] (It is assumed that input "y" values already are in the correct range).

See also
spline, getRegressionLine, getRegressionPlane
Note
Implementation in #include <mrpt/math/interp_fit.hpp>
Requires #include <Eigen/Dense>

Definition at line 157 of file interp_fit.hpp.

References ASSERT_, mrpt::math::MatrixBase< T, CMatrixDynamic< T > >::inverse_LLt(), mrpt::math::MatrixBase< T, CMatrixDynamic< T > >::matProductOf_AAt(), mrpt::math::MatrixVectorBase< T, CMatrixDynamic< T > >::matProductOf_Ab(), MRPT_END, MRPT_START, mrpt::math::CMatrixDynamic< T >::resize(), mrpt::math::CMatrixDynamic< T >::size(), and mrpt::math::wrapToPi().

Here is the call graph for this function:

◆ spline()

template<typename NUMTYPE , class VECTORLIKE >
NUMTYPE mrpt::math::spline ( const NUMTYPE  t,
const VECTORLIKE &  x,
const VECTORLIKE &  y,
bool  wrap2pi = false 
)

Interpolates the value of a function in a point "t" given 4 SORTED points where "t" is between the two middle points If wrap2pi is true, output "y" values are wrapped to ]-pi,pi] (It is assumed that input "y" values already are in the correct range).

See also
leastSquareLinearFit
Note
Implementation in #include <mrpt/math/interp_fit.hpp>

Definition at line 34 of file interp_fit.hpp.

References ASSERT_, mrpt::obs::gnss::b1, mrpt::obs::gnss::b2, M_2PI, M_PI, and mrpt::math::wrapToPi().

Referenced by mrpt::poses::CPoseInterpolatorBase< 3 >::impl_interpolation(), and mrpt::math::CSplineInterpolator1D::query().

Here is the call graph for this function:
Here is the caller graph for this function:



Page generated by Doxygen 1.8.14 for MRPT 2.0.4 Git: 33de1d0ad Sat Jun 20 11:02:42 2020 +0200 at sáb jun 20 17:35:17 CEST 2020