mrpt::hwdrivers::COpenNI2_RGBD360 Class Reference

Detailed Description

A class for grabing RGBD images from several OpenNI2 sensors.

This is used to obtain larger fields of view using a radial configuration of the sensors. The same options (resolution, fps, etc.) are used for every sensor.

Configuration and usage:

---

Data is returned as observations of type mrpt::obs::CObservationRGBD360. See those classes for documentation on their fields.

As with any other CGenericSensor class, the normal sequence of methods to be called is:

• CGenericSensor::loadConfig() - Or calls to the individual setXXX() to configure the sensor parameters.
• COpenNI2_RGBD360::initialize() - to start the communication with the sensor.
• call COpenNI2_RGBD360::getNextObservation() for getting the data.

Calibration parameters

---

The reference system for both depth and RGB images provided by each individual OpenNI2 sensors are referred to the RGB Camera. The extrinsic parameters of each RGBD sensor are provided from a configuration file. This calibration was obtained using the method reported in [].

Coordinates convention

---

The origin of coordinates is the focal point of the RGB camera of the first indexed sensor, with the axes oriented as in the diagram shown in mrpt::obs::CObservation3DRangeScan. Notice in that picture that the RGB camera is assumed to have axes as usual in computer vision, which differ from those for the depth camera.

The X,Y,Z axes used to report the data from accelerometers coincide with those of the depth camera (e.g. the camera standing on a table would have an ACC_Z=-9.8m/s2).

Notice however that, for consistency with stereo cameras, when loading the calibration parameters from a configuration file, the left-to-right pose increment is expected as if both RGB & IR cameras had their +Z axes pointing forward, +X to the right, +Y downwards (just like it's the standard in stereo cameras and in computer vision literature). In other words: the pose stored in this class uses a different axes convention for the depth camera than in a stereo camera, so when a pose L2R is loaded from a calibration file it's actually converted like:

L2R(this class convention) = CPose3D(0,0,0,-90deg,0deg,-90deg) (+) L2R(in the config file)

Some general comments

---

• Depth is grabbed in 10bit depth, and a range N it's converted to meters as: range(m) = 0.1236 * tan(N/2842.5 + 1.1863)
• This sensor can be also used from within rawlog-grabber to grab datasets within a robot with more sensors.
• There is no built-in threading support, so if you use this class manually (not with-in rawlog-grabber), the ideal would be to create a thread and continuously request data from that thread (see mrpt::system::createThread ).
• The intensity channel default to the RGB images, but it can be changed with setVideoChannel() to read the IR camera images (useful for calibrating).
• There is a built-in support for an optional preview of the data on a window, so you don't need to even worry on creating a window to show them.
• This class relies on an embedded version of libfreenect (you do NOT need to install it in your system). Thanks guys for the great job!

Converting to 3D point cloud

---

You can convert the 3D observation into a 3D point cloud with this piece of code:

mrpt::obs::CObservationRGBD360      obs3D;
mrpt::maps::CColouredPointsMap       pntsMap;
pntsMap.colorScheme.scheme = CColouredPointsMap::cmFromIntensityImage;
pntsMap.loadFromRangeScan(obs3D);

Then the point cloud mrpt::maps::CColouredPointsMap can be converted into an OpenGL object for rendering with mrpt::maps::CMetricMap::getAs3DObject() or alternatively with:

mrpt::opengl::CPointCloudColouredPtr gl_points = mrpt::opengl::CPointCloudColoured::Create();
gl_points->loadFromPointsMap(&pntsMap);

Platform-specific comments

---

For more details, refer to libfreenect documentation:

• Linux: You'll need root privileges to access Kinect. Or, install MRPT/scripts/51-kinect.rules in /etc/udev/rules.d/ to allow access to all users.
• Windows:
  • Since MRPT 0.9.4 you'll only need to install libusb-win32: download and extract the latest libusb-win32-bin-x.x.x.x.zip
  • To install the drivers, read this: http://openkinect.org/wiki/Getting_Started#Windows
• MacOS: (write me!)

Format of parameters for loading from a .ini file

---

 PARAMETERS IN THE ".INI"-LIKE CONFIGURATION STRINGS:
-------------------------------------------------------
  [supplied_section_name]
   sensorLabel     = RGBD360       // A text description
   preview_window  = false        // Show a window with a preview of the grabbed data in real-time

   device_number   = 0           // Device index to open (0:first Kinect, 1:second Kinect,...)

   grab_image      = true        // Grab the RGB image channel? (Default=true)
   grab_depth      = true        // Grab the depth channel? (Default=true)
   grab_3D_points  = true        // Grab the 3D point cloud? (Default=true) If disabled, points can be generated later on.

   video_channel   = VIDEO_CHANNEL_RGB // Optional. Can be: VIDEO_CHANNEL_RGB (default) or VIDEO_CHANNEL_IR

   pose_x=0     // Camera position in the robot (meters)
   pose_y=0
   pose_z=0
   pose_yaw=0   // Angles in degrees
   pose_pitch=0
   pose_roll=0


   // Left/Depth camera
   [supplied_section_name_LEFT]
   rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this section (it is not a separate device!)

   resolution = [640 488]
   cx         = 314.649173
   cy         = 240.160459
   fx         = 572.882768
   fy         = 542.739980
   dist       = [-4.747169e-03 -4.357976e-03 0.000000e+00 0.000000e+00 0.000000e+00]    // The order is: [K1 K2 T1 T2 K3]

   // Right/RGB camera
   [supplied_section_name_RIGHT]
   rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this section (it is not a separate device!)

   resolution = [640 480]
   cx         = 322.515987
   cy         = 259.055966
   fx         = 521.179233
   fy         = 493.033034
   dist       = [5.858325e-02 3.856792e-02 0.000000e+00 0.000000e+00 0.000000e+00]    // The order is: [K1 K2 T1 T2 K3]

   // Relative pose of the right camera wrt to the left camera:
   // This assumes that both camera frames are such that +Z points
   // forwards, and +X and +Y to the right and downwards.
   // For the actual coordinates employed in 3D observations, see figure in mrpt::obs::CObservation3DRangeScan
   [supplied_section_name_LEFT2RIGHT_POSE]
   rawlog-grabber-ignore = true // Instructs rawlog-grabber to ignore this section (it is not a separate device!)

   pose_quaternion      = [0.025575 -0.000609 -0.001462 0.999987 0.002038 0.004335 -0.001693]

More references to read:

• http://RGBD360
• http://http://www.openni.org/

Definition at line 161 of file COpenNI2_RGBD360.h.

#include <mrpt/hwdrivers/COpenNI2_RGBD360.h>

Inheritance diagram for mrpt::hwdrivers::COpenNI2_RGBD360:

Public Types
enum	TSensorState { ssInitializing = 0, ssWorking, ssError }
	The current state of the sensor. More...
typedef std::multimap< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr >	TListObservations
typedef std::pair< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr >	TListObsPair
typedef CGenericSensorPtr	Ptr
typedef stlplus::smart_ptr< const CGenericSensor >	ConstPtr

Public Member Functions
	COpenNI2_RGBD360 ()
	Default ctor. More...
	~COpenNI2_RGBD360 ()
	Default ctor. More...
virtual void	initialize ()
	Initializes the 3D camera - should be invoked after calling loadConfig() or setting the different parameters with the set*() methods. More...
virtual void	doProcess ()
	To be called at a high rate (>XX Hz), this method populates the internal buffer of received observations. More...
void	getNextObservation (mrpt::obs::CObservationRGBD360 &out_obs, bool &there_is_obs, bool &hardware_error)
	The main data retrieving function, to be called after calling loadConfig() and initialize(). More...
virtual void	setPathForExternalImages (const std::string &directory)
	Set the path where to save off-rawlog image files (this class DOES take into account this path). More...
virtual const mrpt::hwdrivers::TSensorClassId *	GetRuntimeClass () const =0
TSensorState	getState () const
	The current state of the sensor. More...
double	getProcessRate () const
std::string	getSensorLabel () const
void	setSensorLabel (const std::string &sensorLabel)
void	enableVerbose (bool enabled=true)
	Enable or disable extra debug info dumped to std::cout during sensor operation. More...
bool	isVerboseEnabled () const
void	loadConfig (const mrpt::utils::CConfigFileBase &configSource, const std::string &section)
	Loads the generic settings common to any sensor (See CGenericSensor), then call to "loadConfig_sensorSpecific". More...
void	getObservations (TListObservations &lstObjects)
	Returns a list of enqueued objects, emptying it (thread-safe). More...
void	setExternalImageFormat (const std::string &ext)
	Set the extension ("jpg","gif","png",...) that determines the format of images saved externally The default is "jpg". More...
void	setExternalImageJPEGQuality (const unsigned int quality)
	The quality of JPEG compression, when external images is enabled and the format is "jpg". More...
unsigned int	getExternalImageJPEGQuality () const
void	getNextFrameRGB (mrpt::utils::CImage &rgb_img, uint64_t &timestamp, bool &there_is_obs, bool &hardware_error, unsigned sensor_id=0)
	The main data retrieving function, to be called after calling loadConfig() and initialize(). More...
void	getNextFrameD (mrpt::math::CMatrix &depth_img, uint64_t &timestamp, bool &there_is_obs, bool &hardware_error, unsigned sensor_id=0)
	The main data retrieving function, to be called after calling loadConfig() and initialize(). More...
void	getNextFrameRGBD (mrpt::obs::CObservation3DRangeScan &out_obs, bool &there_is_obs, bool &hardware_error, unsigned sensor_id=0)
	The main data retrieving function, to be called after calling loadConfig() and initialize(). More...
void	setVerbose (bool verbose)
bool	isVerbose () const
bool	getColorSensorParam (mrpt::utils::TCamera &param, unsigned sensor_id=0) const
bool	getDepthSensorParam (mrpt::utils::TCamera &param, unsigned sensor_id=0) const
Sensor parameters (alternative to \a loadConfig ) and manual control
double	getMaxRange () const
	Get the maximum range (meters) that can be read in the observation field "rangeImage". More...
void	enableGrabRGB (bool enable=true)
	Enable/disable the grabbing of the RGB channel. More...
bool	isGrabRGBEnabled () const
void	enableGrabDepth (bool enable=true)
	Enable/disable the grabbing of the depth channel. More...
bool	isGrabDepthEnabled () const
void	enableGrab3DPoints (bool enable=true)
	Enable/disable the grabbing of the 3D point clouds. More...
bool	isGrab3DPointsEnabled () const
Open/Close device methods
void	open (unsigned sensor_id=0)
	Try to open the camera (all the parameters [resolution,fps,...] must be set before calling this) - users may also call initialize(), which in turn calls this method. More...
unsigned int	openDevicesBySerialNum (const std::set< unsigned > &vSerialRequired)
	Open a set of RGBD devices specified by their serial number. More...
unsigned int	openDeviceBySerial (const unsigned int SerialRequired)
	Open a RGBD device specified by its serial number. More...
bool	getDeviceIDFromSerialNum (const unsigned int SerialRequired, int &sensor_id) const
	Get the ID of the device corresponding to 'SerialRequired'. More...
bool	start ()
	Open all sensor streams (normally called automatically at constructor, no need to call it manually). More...
void	kill ()
	Kill the OpenNI2 driver. More...
bool	isOpen (const unsigned sensor_id) const
	Whether there is a working connection to the sensor. More...
void	close (unsigned sensor_id=0)
	Close the connection to the sensor (no need to call it manually unless desired for some reason, since it's called at destructor. More...
int	getNumDevices () const
	The number of available devices at initialization. More...
int	getConnectedDevices ()
	Get a list of the connected OpenNI2 sensors. More...

Static Public Member Functions
static void	registerClass (const TSensorClassId *pNewClass)
	Register a class into the internal list of "CGenericSensor" descendents. More...
static CGenericSensor *	createSensor (const std::string &className)
	Creates a sensor by a name of the class. More...
static CGenericSensorPtr	createSensorPtr (const std::string &className)
	Just like createSensor, but returning a smart pointer to the newly created sensor object. More...
static int	getNumInstances ()
	Get the number of OpenNI2 cameras currently open via COpenNI2Generic. More...

Public Attributes
class HWDRIVERS_IMPEXP	CDevice

Protected Member Functions
virtual void	loadConfig_sensorSpecific (const mrpt::utils::CConfigFileBase &configSource, const std::string &section)
	Loads specific configuration for the device from a given source of configuration parameters, for example, an ".ini" file, loading from the section "[iniSection]" (see utils::CConfigFileBase and derived classes) More...
void	appendObservations (const std::vector< mrpt::utils::CSerializablePtr > &obj)
	This method must be called by derived classes to enqueue a new observation in the list to be returned by getObservations. More...
void	appendObservation (const mrpt::utils::CSerializablePtr &obj)
	Like appendObservations() but for just one observation. More...
void	showLog (const std::string &message) const

Protected Attributes
mrpt::poses::CPose3D	m_sensorPoseOnRobot
bool	m_preview_window
	Show preview window while grabbing. More...
size_t	m_preview_window_decimation
	If preview is enabled, only show 1 out of N images. More...
size_t	m_preview_decim_counter_range
size_t	m_preview_decim_counter_rgb
mrpt::gui::CDisplayWindowPtr	m_win_range [NUM_SENSORS]
mrpt::gui::CDisplayWindowPtr	m_win_int [NUM_SENSORS]
double	m_maxRange
	Sensor max range (meters) More...
bool	m_grab_rgb
bool	m_grab_depth
bool	m_grab_3D_points
	Default: all true. More...
size_t	m_grab_decimation_counter
	Used when "m_grab_decimation" is enabled. More...
TSensorState	m_state
bool	m_verbose
std::string	m_path_for_external_images
	The path where to save off-rawlog images: empty means save images embedded in the rawlog. More...
std::string	m_external_images_format
	The extension ("jpg","gif","png",...) that determines the format of images saved externally. More...
unsigned int	m_external_images_jpeg_quality
	For JPEG images, the quality (default=95%). More...
std::vector< int >	vSerialNums
	A vector with the serial numbers of the available devices. More...
int	m_width
	The same options (width, height and fps) are set for all the sensors. More...
int	m_height
float	m_fps
int	m_rgb_format
int	m_depth_format
bool	m_verbose
bool	m_grab_image
	The data that the RGBD sensors can return. More...
Common settings to any sensor, loaded in "loadConfig"
double	m_process_rate
	See CGenericSensor. More...
size_t	m_max_queue_len
	See CGenericSensor. More...
size_t	m_grab_decimation
	If set to N>=2, only 1 out of N observations will be saved to m_objList. More...
std::string	m_sensorLabel
	See CGenericSensor. More...

Static Protected Attributes
static const int	NUM_SENSORS = 2

Member Typedef Documentation

ConstPtr

typedef stlplus::smart_ptr<const CGenericSensor> mrpt::hwdrivers::CGenericSensor::ConstPtr

inherited

Definition at line 103 of file CGenericSensor.h.

Ptr

typedef CGenericSensorPtr mrpt::hwdrivers::CGenericSensor::Ptr

inherited

Definition at line 102 of file CGenericSensor.h.

TListObservations

typedef std::multimap< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr > mrpt::hwdrivers::CGenericSensor::TListObservations

inherited

Definition at line 68 of file CGenericSensor.h.

TListObsPair

typedef std::pair< mrpt::system::TTimeStamp, mrpt::utils::CSerializablePtr > mrpt::hwdrivers::CGenericSensor::TListObsPair

inherited

Definition at line 69 of file CGenericSensor.h.

Member Enumeration Documentation

TSensorState

enum mrpt::hwdrivers::CGenericSensor::TSensorState

inherited

The current state of the sensor.

See also

CGenericSensor::getState

Enumerator
ssInitializing
ssWorking
ssError

Definition at line 74 of file CGenericSensor.h.

Constructor & Destructor Documentation

COpenNI2_RGBD360()

COpenNI2_RGBD360::COpenNI2_RGBD360

(

)

Default ctor.

Definition at line 35 of file COpenNI2_RGBD360.cpp.

~COpenNI2_RGBD360()

COpenNI2_RGBD360::~COpenNI2_RGBD360

(

)

Default ctor.

Definition at line 55 of file COpenNI2_RGBD360.cpp.

Member Function Documentation

appendObservation()

void mrpt::hwdrivers::CGenericSensor::appendObservation ( const mrpt::utils::CSerializablePtr &  obj )

inlineprotectedinherited

Like appendObservations() but for just one observation.

Definition at line 147 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CSwissRanger3DCamera::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::C2DRangeFinderAbstract::doProcess(), mrpt::hwdrivers::CCANBusReader::doProcess(), mrpt::hwdrivers::CVelodyneScanner::doProcess(), and mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow().

appendObservations()

void CGenericSensor::appendObservations ( const std::vector< mrpt::utils::CSerializablePtr > &  obj )

protectedinherited

This method must be called by derived classes to enqueue a new observation in the list to be returned by getObservations.

Passed objects must be created in dynamic memory and a smart pointer passed. Example of creation:

mrpt::obs::CObservationGPSPtr  o = CObservationGPSPtr( new CObservationGPS() );
o-> .... // Set data
appendObservation(o);

If several observations are passed at once in the vector, they'll be considered as a block regarding the grabbing decimation factor.

Definition at line 53 of file CGenericSensor.cpp.

References CLASS_ID, mrpt::hwdrivers::CGenericSensor::m_csObjList, mrpt::hwdrivers::CGenericSensor::m_grab_decimation, mrpt::hwdrivers::CGenericSensor::m_grab_decimation_counter, mrpt::hwdrivers::CGenericSensor::m_objList, and THROW_EXCEPTION.

Referenced by mrpt::hwdrivers::CNationalInstrumentsDAQ::doProcess(), and mrpt::hwdrivers::CKinect::doProcess().

close()

void COpenNI2Generic::close ( unsigned  sensor_id = 0 )

inherited

Close the connection to the sensor (no need to call it manually unless desired for some reason, since it's called at destructor.

Definition at line 337 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), MRPT_UNUSED_PARAM, THROW_EXCEPTION, vDevices, and vDevices_mx.

createSensor()

CGenericSensor * CGenericSensor::createSensor ( const std::string &  className )

staticinherited

Creates a sensor by a name of the class.

Typically the user may want to create a smart pointer around the returned pointer, whis is made with:

CGenericSensorPtr sensor = CGenericSensorPtr( CGenericSensor::createSensor("XXX") );

Returns

A pointer to a new class, or NULL if class name is unknown.

Definition at line 103 of file CGenericSensor.cpp.

References mrpt::hwdrivers::CGenericSensor::get_registered_sensor_classes().

createSensorPtr()

static CGenericSensorPtr mrpt::hwdrivers::CGenericSensor::createSensorPtr ( const std::string &  className )

inlinestaticinherited

Just like createSensor, but returning a smart pointer to the newly created sensor object.

Definition at line 180 of file CGenericSensor.h.

doProcess()

void COpenNI2_RGBD360::doProcess ( )

virtual

To be called at a high rate (>XX Hz), this method populates the internal buffer of received observations.

This method will be invoked at a minimum rate of "process_rate" (Hz)

This method is mainly intended for usage within rawlog-grabber or similar programs. For an alternative, see getNextObservation()

Exceptions

This	method must throw an exception with a descriptive message if some critical error is found.

See also

getNextObservation

Exceptions

This	method must throw an exception with a descriptive message if some critical error is found.

Implements mrpt::hwdrivers::CGenericSensor.

Definition at line 89 of file COpenNI2_RGBD360.cpp.

References THROW_EXCEPTION.

enableGrab3DPoints()

void mrpt::hwdrivers::COpenNI2_RGBD360::enableGrab3DPoints ( bool  enable = true )

inline

Enable/disable the grabbing of the 3D point clouds.

Definition at line 217 of file COpenNI2_RGBD360.h.

enableGrabDepth()

void mrpt::hwdrivers::COpenNI2_RGBD360::enableGrabDepth ( bool  enable = true )

inline

Enable/disable the grabbing of the depth channel.

Definition at line 213 of file COpenNI2_RGBD360.h.

enableGrabRGB()

void mrpt::hwdrivers::COpenNI2_RGBD360::enableGrabRGB ( bool  enable = true )

inline

Enable/disable the grabbing of the RGB channel.

Definition at line 209 of file COpenNI2_RGBD360.h.

enableVerbose()

void mrpt::hwdrivers::CGenericSensor::enableVerbose ( bool  enabled = true )

inlineinherited

Enable or disable extra debug info dumped to std::cout during sensor operation.

Default: disabled unless the environment variable "MRPT_HWDRIVERS_VERBOSE" is set to "1" during object creation.

Definition at line 92 of file CGenericSensor.h.

getColorSensorParam()

bool COpenNI2Generic::getColorSensorParam ( mrpt::utils::TCamera &  param, unsigned  sensor_id = 0  ) const

inherited

Definition at line 458 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::CDevice::COLOR_STREAM, mrpt::hwdrivers::COpenNI2Generic::isOpen(), MRPT_UNUSED_PARAM, THROW_EXCEPTION, vDevices, and vDevices_mx.

getConnectedDevices()

int COpenNI2Generic::getConnectedDevices ( )

inherited

Get a list of the connected OpenNI2 sensors.

This method can or cannot be implemented in the derived class, depending on the need for it.

Exceptions

This	method must throw an exception with a descriptive message if some critical error is found.

Definition at line 158 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), info, mrpt::hwdrivers::COpenNI2Generic::m_depth_format, mrpt::hwdrivers::COpenNI2Generic::m_rgb_format, mrpt::hwdrivers::COpenNI2Generic::m_verbose, mrpt::hwdrivers::COpenNI2Generic::showLog(), THROW_EXCEPTION, vDevices, and vDevices_mx.

getDepthSensorParam()

bool COpenNI2Generic::getDepthSensorParam ( mrpt::utils::TCamera &  param, unsigned  sensor_id = 0  ) const

inherited

Definition at line 471 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::CDevice::DEPTH_STREAM, mrpt::hwdrivers::COpenNI2Generic::isOpen(), MRPT_UNUSED_PARAM, THROW_EXCEPTION, vDevices, and vDevices_mx.

getDeviceIDFromSerialNum()

bool COpenNI2Generic::getDeviceIDFromSerialNum ( const unsigned int  SerialRequired, int &  sensor_id  ) const

inherited

Get the ID of the device corresponding to 'SerialRequired'.

Definition at line 317 of file COpenNI2Generic.cpp.

References MRPT_UNUSED_PARAM, THROW_EXCEPTION, vDevices, and vDevices_mx.

getExternalImageJPEGQuality()

unsigned int mrpt::hwdrivers::CGenericSensor::getExternalImageJPEGQuality ( ) const

inlineinherited

Definition at line 234 of file CGenericSensor.h.

getMaxRange()

double mrpt::hwdrivers::COpenNI2_RGBD360::getMaxRange ( ) const

inline

Get the maximum range (meters) that can be read in the observation field "rangeImage".

Definition at line 206 of file COpenNI2_RGBD360.h.

getNextFrameD()

void COpenNI2Generic::getNextFrameD ( mrpt::math::CMatrix &  depth_img, uint64_t &  timestamp, bool &  there_is_obs, bool &  hardware_error, unsigned  sensor_id = 0  )

inherited

The main data retrieving function, to be called after calling loadConfig() and initialize().

Parameters

depth_img	The output retrieved depth image (only if there_is_obs=true).
timestamp	The timestamp of the capture (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.
sensor_id	The index of the sensor accessed.

Definition at line 398 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), MRPT_UNUSED_PARAM, mrpt::hwdrivers::COpenNI2Generic::showLog(), THROW_EXCEPTION, and vDevices.

getNextFrameRGB()

void COpenNI2Generic::getNextFrameRGB ( mrpt::utils::CImage &  rgb_img, uint64_t &  timestamp, bool &  there_is_obs, bool &  hardware_error, unsigned  sensor_id = 0  )

inherited

The main data retrieving function, to be called after calling loadConfig() and initialize().

Parameters

out_img	The output retrieved RGB image (only if there_is_obs=true).
timestamp	The timestamp of the capture (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.
sensor_id	The index of the sensor accessed.
out_obs	The output retrieved observation (only if there_is_obs=true).
timestamp	The timestamp of the capture (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.
sensor_id	The index of the sensor accessed.

Definition at line 363 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), MRPT_UNUSED_PARAM, mrpt::hwdrivers::COpenNI2Generic::showLog(), THROW_EXCEPTION, and vDevices.

getNextFrameRGBD()

void COpenNI2Generic::getNextFrameRGBD ( mrpt::obs::CObservation3DRangeScan &  out_obs, bool &  there_is_obs, bool &  hardware_error, unsigned  sensor_id = 0  )

inherited

The main data retrieving function, to be called after calling loadConfig() and initialize().

Parameters

out_obs	The output retrieved observation (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.
sensor_id	The index of the sensor accessed.

See also

doProcess

Parameters

out_obs	The output retrieved observation (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.
sensor_id	The index of the sensor accessed.

Definition at line 432 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), MRPT_UNUSED_PARAM, mrpt::hwdrivers::COpenNI2Generic::showLog(), THROW_EXCEPTION, and vDevices.

getNextObservation()

void COpenNI2_RGBD360::getNextObservation	(	mrpt::obs::CObservationRGBD360 &	out_obs,
		bool &	there_is_obs,
		bool &	hardware_error
	)

The main data retrieving function, to be called after calling loadConfig() and initialize().

Parameters

out_obs	The output retrieved observation (only if there_is_obs=true).
there_is_obs	If set to false, there was no new observation.
hardware_error	True on hardware/comms error.

See also

doProcess

Definition at line 163 of file COpenNI2_RGBD360.cpp.

References mrpt::gui::CDisplayWindow::Create(), mrpt::system::getCurrentTime(), mrpt::obs::CObservationRGBD360::hasIntensityImage, mrpt::obs::CObservationRGBD360::hasRangeImage, mrpt::obs::CObservationRGBD360::intensityImages, MRPT_UNUSED_PARAM, mrpt::obs::CObservationRGBD360::rangeImages, mrpt::utils::CTicTac::Tac(), THROW_EXCEPTION, mrpt::utils::CTicTac::Tic(), mrpt::obs::CObservation::timestamp, and mrpt::obs::CObservationRGBD360::timestamps.

getNumDevices()

int COpenNI2Generic::getNumDevices ( ) const

inherited

The number of available devices at initialization.

Definition at line 136 of file COpenNI2Generic.cpp.

References vDevices, and vDevices_mx.

Referenced by mrpt::hwdrivers::COpenNI2Generic::close(), mrpt::hwdrivers::COpenNI2Generic::getConnectedDevices(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameD(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameRGB(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameRGBD(), mrpt::hwdrivers::COpenNI2Generic::isOpen(), and mrpt::hwdrivers::COpenNI2Generic::open().

getNumInstances()

int COpenNI2Generic::getNumInstances ( )

staticinherited

Get the number of OpenNI2 cameras currently open via COpenNI2Generic.

Definition at line 52 of file COpenNI2Generic.cpp.

References numInstances().

getObservations()

void CGenericSensor::getObservations ( TListObservations &  lstObjects )

inherited

Returns a list of enqueued objects, emptying it (thread-safe).

The objects must be freed by the invoker.

Definition at line 90 of file CGenericSensor.cpp.

References mrpt::hwdrivers::CGenericSensor::m_csObjList, and mrpt::hwdrivers::CGenericSensor::m_objList.

getProcessRate()

double mrpt::hwdrivers::CGenericSensor::getProcessRate ( ) const

inlineinherited

Definition at line 84 of file CGenericSensor.h.

GetRuntimeClass()

virtual const mrpt::hwdrivers::TSensorClassId* mrpt::hwdrivers::CGenericSensor::GetRuntimeClass ( ) const

pure virtualinherited

getSensorLabel()

std::string mrpt::hwdrivers::CGenericSensor::getSensorLabel ( ) const

inlineinherited

Definition at line 86 of file CGenericSensor.h.

getState()

TSensorState mrpt::hwdrivers::CGenericSensor::getState ( ) const

inlineinherited

The current state of the sensor.

Definition at line 82 of file CGenericSensor.h.

initialize()

void COpenNI2_RGBD360::initialize ( void  )

virtual

Initializes the 3D camera - should be invoked after calling loadConfig() or setting the different parameters with the set*() methods.

This method can or cannot be implemented in the derived class, depending on the need for it.

Exceptions

This	method must throw an exception with a descriptive message if some critical error is found.

Reimplemented from mrpt::hwdrivers::CGenericSensor.

Definition at line 65 of file COpenNI2_RGBD360.cpp.

References THROW_EXCEPTION.

isGrab3DPointsEnabled()

bool mrpt::hwdrivers::COpenNI2_RGBD360::isGrab3DPointsEnabled ( ) const

inline

Definition at line 218 of file COpenNI2_RGBD360.h.

isGrabDepthEnabled()

bool mrpt::hwdrivers::COpenNI2_RGBD360::isGrabDepthEnabled ( ) const

inline

Definition at line 214 of file COpenNI2_RGBD360.h.

isGrabRGBEnabled()

bool mrpt::hwdrivers::COpenNI2_RGBD360::isGrabRGBEnabled ( ) const

inline

Definition at line 210 of file COpenNI2_RGBD360.h.

isOpen()

bool COpenNI2Generic::isOpen ( const unsigned  sensor_id ) const

inherited

Whether there is a working connection to the sensor.

Definition at line 222 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), MRPT_UNUSED_PARAM, THROW_EXCEPTION, vDevices, and vDevices_mx.

Referenced by mrpt::hwdrivers::COpenNI2Generic::getColorSensorParam(), mrpt::hwdrivers::COpenNI2Generic::getDepthSensorParam(), mrpt::hwdrivers::COpenNI2Generic::open(), and mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

isVerbose()

bool COpenNI2Generic::isVerbose ( ) const

inherited

Definition at line 145 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::m_verbose.

Referenced by mrpt::hwdrivers::COpenNI2Generic::showLog().

isVerboseEnabled()

bool mrpt::hwdrivers::CGenericSensor::isVerboseEnabled ( ) const

inlineinherited

Definition at line 93 of file CGenericSensor.h.

kill()

void COpenNI2Generic::kill ( )

inherited

Kill the OpenNI2 driver.

See also

start()

Definition at line 211 of file COpenNI2Generic.cpp.

References THROW_EXCEPTION, vDevices, and vDevices_mx.

Referenced by mrpt::hwdrivers::COpenNI2Generic::~COpenNI2Generic().

loadConfig()

void CGenericSensor::loadConfig ( const mrpt::utils::CConfigFileBase &  cfg, const std::string &  sect  )

inherited

Loads the generic settings common to any sensor (See CGenericSensor), then call to "loadConfig_sensorSpecific".

Exceptions

This	method throws an exception with a descriptive message if some critical parameter is missing or has an invalid value.

Definition at line 131 of file CGenericSensor.cpp.

References mrpt::hwdrivers::CGenericSensor::loadConfig_sensorSpecific(), mrpt::hwdrivers::CGenericSensor::m_grab_decimation, mrpt::hwdrivers::CGenericSensor::m_grab_decimation_counter, mrpt::hwdrivers::CGenericSensor::m_max_queue_len, mrpt::hwdrivers::CGenericSensor::m_process_rate, mrpt::hwdrivers::CGenericSensor::m_sensorLabel, MRPT_END, MRPT_START, mrpt::utils::CConfigFileBase::read_double(), mrpt::utils::CConfigFileBase::read_int(), and mrpt::utils::CConfigFileBase::read_string().

loadConfig_sensorSpecific()

void COpenNI2_RGBD360::loadConfig_sensorSpecific ( const mrpt::utils::CConfigFileBase &  configSource, const std::string &  iniSection  )

protectedvirtual

Loads specific configuration for the device from a given source of configuration parameters, for example, an ".ini" file, loading from the section "[iniSection]" (see utils::CConfigFileBase and derived classes)

Exceptions

This	method must throw an exception with a descriptive message if some critical parameter is missing or has an invalid value.

Implements mrpt::hwdrivers::CGenericSensor.

Definition at line 126 of file COpenNI2_RGBD360.cpp.

References DEG2RAD, mrpt::utils::CConfigFileBase::read_bool(), mrpt::utils::CConfigFileBase::read_float(), and mrpt::utils::CConfigFileBase::read_int().

open()

void COpenNI2Generic::open ( unsigned  sensor_id = 0 )

inherited

Try to open the camera (all the parameters [resolution,fps,...] must be set before calling this) - users may also call initialize(), which in turn calls this method.

Raises an exception upon error.

Exceptions

std::exception

A textual description of the error.

Definition at line 236 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::getNumDevices(), mrpt::hwdrivers::COpenNI2Generic::isOpen(), mrpt::hwdrivers::COpenNI2Generic::m_fps, mrpt::hwdrivers::COpenNI2Generic::m_height, mrpt::hwdrivers::COpenNI2Generic::m_verbose, mrpt::hwdrivers::COpenNI2Generic::m_width, MRPT_UNUSED_PARAM, mrpt::hwdrivers::COpenNI2Generic::showLog(), mrpt::system::sleep(), THROW_EXCEPTION, vDevices, and vDevices_mx.

Referenced by mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

openDeviceBySerial()

unsigned int COpenNI2Generic::openDeviceBySerial ( const unsigned int  SerialRequired )

inherited

Open a RGBD device specified by its serial number.

This method is a wrapper for openDevicesBySerialNum(const std::set<unsigned>& vSerialRequired) This method requires to open the sensors which are still closed to read their serial.

Definition at line 311 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

openDevicesBySerialNum()

unsigned int COpenNI2Generic::openDevicesBySerialNum ( const std::set< unsigned > &  vSerialRequired )

inherited

Open a set of RGBD devices specified by their serial number.

Raises an exception when the demanded serial numbers are not among the connected devices. This function also fills a vector with the serial numbers of the connected OpenNI2 sensors (this requires openning the sensors which are still closed to read their serial)

Definition at line 270 of file COpenNI2Generic.cpp.

References mrpt::mrpt::format(), mrpt::hwdrivers::COpenNI2Generic::isOpen(), mrpt::hwdrivers::COpenNI2Generic::m_fps, mrpt::hwdrivers::COpenNI2Generic::m_height, mrpt::hwdrivers::COpenNI2Generic::m_verbose, mrpt::hwdrivers::COpenNI2Generic::m_width, MRPT_UNUSED_PARAM, mrpt::hwdrivers::COpenNI2Generic::open(), mrpt::hwdrivers::COpenNI2Generic::showLog(), THROW_EXCEPTION, vDevices, and vDevices_mx.

Referenced by mrpt::hwdrivers::COpenNI2Generic::openDeviceBySerial().

registerClass()

void CGenericSensor::registerClass ( const TSensorClassId *  pNewClass )

staticinherited

Register a class into the internal list of "CGenericSensor" descendents.

Used internally in the macros DEFINE_GENERIC_SENSOR, etc...

Can be used as "CGenericSensor::registerClass( SENSOR_CLASS_ID(CMySensor) );" if building custom sensors outside mrpt libraries in user code.

Definition at line 120 of file CGenericSensor.cpp.

References mrpt::hwdrivers::TSensorClassId::className, and mrpt::hwdrivers::CGenericSensor::get_registered_sensor_classes().

Referenced by mrpt::hwdrivers::CGenericSensor::CLASSINIT_GENERIC_SENSOR::CLASSINIT_GENERIC_SENSOR().

setExternalImageFormat()

void mrpt::hwdrivers::CGenericSensor::setExternalImageFormat ( const std::string &  ext )

inlineinherited

Set the extension ("jpg","gif","png",...) that determines the format of images saved externally The default is "jpg".

See also

setPathForExternalImages, setExternalImageJPEGQuality

Definition at line 226 of file CGenericSensor.h.

setExternalImageJPEGQuality()

void mrpt::hwdrivers::CGenericSensor::setExternalImageJPEGQuality ( const unsigned int  quality )

inlineinherited

The quality of JPEG compression, when external images is enabled and the format is "jpg".

See also

setExternalImageFormat

Definition at line 231 of file CGenericSensor.h.

References quality.

setPathForExternalImages()

void COpenNI2_RGBD360::setPathForExternalImages ( const std::string &  directory )

virtual

Set the path where to save off-rawlog image files (this class DOES take into account this path).

An empty string (the default value at construction) means to save images embedded in the rawlog, instead of on separate files.

Exceptions

std::exception

If the directory doesn't exists and cannot be created.

Reimplemented from mrpt::hwdrivers::CGenericSensor.

Definition at line 241 of file COpenNI2_RGBD360.cpp.

References MRPT_UNUSED_PARAM.

setSensorLabel()

void mrpt::hwdrivers::CGenericSensor::setSensorLabel ( const std::string &  sensorLabel )

inlineinherited

Definition at line 87 of file CGenericSensor.h.

setVerbose()

void COpenNI2Generic::setVerbose ( bool  verbose )

inherited

Definition at line 141 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::m_verbose.

showLog()

void COpenNI2Generic::showLog ( const std::string &  message ) const

protectedinherited

Definition at line 149 of file COpenNI2Generic.cpp.

References mrpt::hwdrivers::COpenNI2Generic::isVerbose().

Referenced by mrpt::hwdrivers::COpenNI2Generic::getConnectedDevices(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameD(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameRGB(), mrpt::hwdrivers::COpenNI2Generic::getNextFrameRGBD(), mrpt::hwdrivers::COpenNI2Generic::open(), and mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

start()

bool COpenNI2Generic::start ( )

inherited

Open all sensor streams (normally called automatically at constructor, no need to call it manually).

Returns

false on error

See also

kill() to close

Definition at line 108 of file COpenNI2Generic.cpp.

References numInstances(), and THROW_EXCEPTION.

Referenced by mrpt::hwdrivers::COpenNI2Generic::COpenNI2Generic().

Member Data Documentation

CDevice

class HWDRIVERS_IMPEXP mrpt::hwdrivers::COpenNI2Generic::CDevice

inherited

Definition at line 115 of file COpenNI2Generic.h.

m_depth_format

int mrpt::hwdrivers::COpenNI2Generic::m_depth_format

protectedinherited

Definition at line 123 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::getConnectedDevices().

m_external_images_format

std::string mrpt::hwdrivers::CGenericSensor::m_external_images_format

protectedinherited

The extension ("jpg","gif","png",...) that determines the format of images saved externally.

See also

setPathForExternalImages

Definition at line 131 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::loadConfig_sensorSpecific().

m_external_images_jpeg_quality

unsigned int mrpt::hwdrivers::CGenericSensor::m_external_images_jpeg_quality

protectedinherited

For JPEG images, the quality (default=95%).

Definition at line 132 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::loadConfig_sensorSpecific().

m_fps

float mrpt::hwdrivers::COpenNI2Generic::m_fps

protectedinherited

Definition at line 122 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::open(), and mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

m_grab_3D_points

bool mrpt::hwdrivers::COpenNI2_RGBD360::m_grab_3D_points

protected

Default: all true.

Definition at line 239 of file COpenNI2_RGBD360.h.

m_grab_decimation

size_t mrpt::hwdrivers::CGenericSensor::m_grab_decimation

protectedinherited

If set to N>=2, only 1 out of N observations will be saved to m_objList.

Definition at line 118 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGenericSensor::appendObservations(), and mrpt::hwdrivers::CGenericSensor::loadConfig().

m_grab_decimation_counter

size_t mrpt::hwdrivers::CGenericSensor::m_grab_decimation_counter

protectedinherited

Used when "m_grab_decimation" is enabled.

Definition at line 123 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGenericSensor::appendObservations(), and mrpt::hwdrivers::CGenericSensor::loadConfig().

m_grab_depth

bool mrpt::hwdrivers::COpenNI2_RGBD360::m_grab_depth

protected

Definition at line 239 of file COpenNI2_RGBD360.h.

m_grab_image

bool mrpt::hwdrivers::COpenNI2Generic::m_grab_image

protectedinherited

The data that the RGBD sensors can return.

Definition at line 127 of file COpenNI2Generic.h.

m_grab_rgb

bool mrpt::hwdrivers::COpenNI2_RGBD360::m_grab_rgb

protected

Definition at line 239 of file COpenNI2_RGBD360.h.

m_height

int mrpt::hwdrivers::COpenNI2Generic::m_height

protectedinherited

Definition at line 121 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::open(), and mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

m_max_queue_len

size_t mrpt::hwdrivers::CGenericSensor::m_max_queue_len

protectedinherited

See CGenericSensor.

Definition at line 117 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGenericSensor::loadConfig().

m_maxRange

double mrpt::hwdrivers::COpenNI2_RGBD360::m_maxRange

protected

Sensor max range (meters)

Definition at line 237 of file COpenNI2_RGBD360.h.

m_path_for_external_images

std::string mrpt::hwdrivers::CGenericSensor::m_path_for_external_images

protectedinherited

The path where to save off-rawlog images: empty means save images embedded in the rawlog.

Definition at line 130 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), and mrpt::hwdrivers::CSwissRanger3DCamera::setPathForExternalImages().

m_preview_decim_counter_range

size_t mrpt::hwdrivers::COpenNI2_RGBD360::m_preview_decim_counter_range

protected

Definition at line 234 of file COpenNI2_RGBD360.h.

m_preview_decim_counter_rgb

size_t mrpt::hwdrivers::COpenNI2_RGBD360::m_preview_decim_counter_rgb

protected

Definition at line 234 of file COpenNI2_RGBD360.h.

m_preview_window

bool mrpt::hwdrivers::COpenNI2_RGBD360::m_preview_window

protected

Show preview window while grabbing.

Definition at line 232 of file COpenNI2_RGBD360.h.

m_preview_window_decimation

size_t mrpt::hwdrivers::COpenNI2_RGBD360::m_preview_window_decimation

protected

If preview is enabled, only show 1 out of N images.

Definition at line 233 of file COpenNI2_RGBD360.h.

m_process_rate

double mrpt::hwdrivers::CGenericSensor::m_process_rate

protectedinherited

See CGenericSensor.

Definition at line 116 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGyroKVHDSP3000::initialize(), and mrpt::hwdrivers::CGenericSensor::loadConfig().

m_rgb_format

int mrpt::hwdrivers::COpenNI2Generic::m_rgb_format

protectedinherited

Definition at line 123 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::getConnectedDevices().

m_sensorLabel

std::string mrpt::hwdrivers::CGenericSensor::m_sensorLabel

protectedinherited

See CGenericSensor.

Definition at line 119 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CCANBusReader::CCANBusReader(), mrpt::hwdrivers::CGPSInterface::CGPSInterface(), mrpt::hwdrivers::CGyroKVHDSP3000::CGyroKVHDSP3000(), mrpt::hwdrivers::CHokuyoURG::CHokuyoURG(), mrpt::hwdrivers::CIMUIntersense::CIMUIntersense(), mrpt::hwdrivers::CIMUXSens::CIMUXSens(), mrpt::hwdrivers::CIMUXSens_MT4::CIMUXSens_MT4(), mrpt::hwdrivers::CKinect::CKinect(), mrpt::hwdrivers::CNationalInstrumentsDAQ::CNationalInstrumentsDAQ(), mrpt::hwdrivers::CRoboPeakLidar::CRoboPeakLidar(), mrpt::hwdrivers::CSickLaserSerial::CSickLaserSerial(), mrpt::hwdrivers::CSickLaserUSB::CSickLaserUSB(), mrpt::hwdrivers::CSkeletonTracker::CSkeletonTracker(), mrpt::hwdrivers::CSwissRanger3DCamera::CSwissRanger3DCamera(), mrpt::hwdrivers::CVelodyneScanner::CVelodyneScanner(), mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CRoboPeakLidar::doProcessSimple(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CSwissRanger3DCamera::getNextObservation(), mrpt::hwdrivers::CKinect::getNextObservation(), mrpt::hwdrivers::CVelodyneScanner::getNextObservation(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::hwdrivers::CGenericSensor::loadConfig(), mrpt::hwdrivers::CSkeletonTracker::processPreview(), mrpt::hwdrivers::C2DRangeFinderAbstract::processPreview(), and mrpt::hwdrivers::CSkeletonTracker::processPreviewNone().

m_sensorPoseOnRobot

mrpt::poses::CPose3D mrpt::hwdrivers::COpenNI2_RGBD360::m_sensorPoseOnRobot

protected

Definition at line 228 of file COpenNI2_RGBD360.h.

m_state

TSensorState mrpt::hwdrivers::CGenericSensor::m_state

protectedinherited

Definition at line 125 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGyroKVHDSP3000::CGyroKVHDSP3000(), mrpt::hwdrivers::CIMUXSens_MT4::doProcess(), mrpt::hwdrivers::CIMUXSens::doProcess(), mrpt::hwdrivers::CSkeletonTracker::doProcess(), mrpt::hwdrivers::CSwissRanger3DCamera::doProcess(), mrpt::hwdrivers::CIMUIntersense::doProcess(), mrpt::hwdrivers::CGyroKVHDSP3000::doProcess(), mrpt::hwdrivers::C2DRangeFinderAbstract::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CNationalInstrumentsDAQ::doProcess(), mrpt::hwdrivers::CKinect::doProcess(), mrpt::hwdrivers::CVelodyneScanner::doProcess(), mrpt::hwdrivers::CSickLaserUSB::doProcessSimple(), mrpt::hwdrivers::CCANBusReader::doProcessSimple(), mrpt::hwdrivers::CSickLaserSerial::doProcessSimple(), mrpt::hwdrivers::CHokuyoURG::doProcessSimple(), mrpt::hwdrivers::CGPSInterface::flushParsedMessagesNow(), mrpt::hwdrivers::CVelodyneScanner::getNextObservation(), mrpt::hwdrivers::CIMUXSens_MT4::initialize(), mrpt::hwdrivers::CIMUXSens::initialize(), mrpt::hwdrivers::CSkeletonTracker::initialize(), mrpt::hwdrivers::CIMUIntersense::initialize(), mrpt::hwdrivers::CGyroKVHDSP3000::initialize(), mrpt::hwdrivers::CVelodyneScanner::initialize(), mrpt::hwdrivers::CNationalInstrumentsDAQ::readFromDAQ(), and mrpt::hwdrivers::CIMUXSens::searchPortAndConnect().

m_verbose [1/2]

bool mrpt::hwdrivers::COpenNI2Generic::m_verbose

protectedinherited

Definition at line 124 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::COpenNI2Generic(), mrpt::hwdrivers::COpenNI2Generic::getConnectedDevices(), mrpt::hwdrivers::COpenNI2Generic::isVerbose(), mrpt::hwdrivers::COpenNI2Generic::open(), mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum(), and mrpt::hwdrivers::COpenNI2Generic::setVerbose().

m_verbose [2/2]

bool mrpt::hwdrivers::CGenericSensor::m_verbose

protectedinherited

Definition at line 126 of file CGenericSensor.h.

Referenced by mrpt::hwdrivers::CGenericSensor::CGenericSensor(), mrpt::hwdrivers::CRoboPeakLidar::checkCOMMs(), mrpt::hwdrivers::CNTRIPEmitter::doProcess(), mrpt::hwdrivers::CGPSInterface::doProcess(), mrpt::hwdrivers::CNationalInstrumentsDAQ::grabbing_thread(), mrpt::hwdrivers::CIMUXSens_MT4::initialize(), mrpt::hwdrivers::CHokuyoURG::initialize(), mrpt::hwdrivers::CVelodyneScanner::internal_read_PCAP_packet(), mrpt::hwdrivers::CGPSInterface::JAVAD_sendMessage(), mrpt::hwdrivers::CGPSInterface::legacy_topcon_setup_commands(), mrpt::hwdrivers::CGPSInterface::OnConnectionEstablished(), mrpt::hwdrivers::CGPSInterface::OnConnectionShutdown(), mrpt::hwdrivers::CNationalInstrumentsDAQ::stop(), and mrpt::hwdrivers::CGPSInterface::tryToOpenTheCOM().

m_width

int mrpt::hwdrivers::COpenNI2Generic::m_width

protectedinherited

The same options (width, height and fps) are set for all the sensors.

(This could be changed if necessary)

Definition at line 121 of file COpenNI2Generic.h.

Referenced by mrpt::hwdrivers::COpenNI2Generic::open(), and mrpt::hwdrivers::COpenNI2Generic::openDevicesBySerialNum().

m_win_int

mrpt::gui::CDisplayWindowPtr mrpt::hwdrivers::COpenNI2_RGBD360::m_win_int[NUM_SENSORS]

protected

Definition at line 235 of file COpenNI2_RGBD360.h.

m_win_range

mrpt::gui::CDisplayWindowPtr mrpt::hwdrivers::COpenNI2_RGBD360::m_win_range[NUM_SENSORS]

protected

Definition at line 235 of file COpenNI2_RGBD360.h.

NUM_SENSORS

const int mrpt::hwdrivers::COpenNI2_RGBD360::NUM_SENSORS = 2

staticprotected

Definition at line 230 of file COpenNI2_RGBD360.h.

vSerialNums

std::vector<int> mrpt::hwdrivers::COpenNI2Generic::vSerialNums

protectedinherited

A vector with the serial numbers of the available devices.

Definition at line 118 of file COpenNI2Generic.h.