Detailed Description

The low-level serial communication class.

Definition at line 53 of file cmt1.h.

#include <xSens_MT3/cmt1.h>

Public Member Functions
	Cmt1s ()
	Default constructor, initializes all members to their default values. More...

	~Cmt1s ()
	Destructor, de-initializes, frees memory allocated for buffers, etc. More...

XsensResultValue	close (void)
	Close the serial communication port. More...

XsensResultValue	escape (const CmtControlLine mask, const CmtControlLine state)
	Manipulate the Serial control lines. More...

XsensResultValue	flushData (void)
	Flush all data to be transmitted / received. More...

uint32_t	getBaudrate (void) const
	Return the baudrate that is currently being used by the port. More...

HANDLE	getHandle (void) const
	Return the handle of the port. More...

uint8_t	getPortNr (void) const
	Retrieve the port number that was last successfully opened. More...

void	getPortName (char *portname) const
	Retrieve the port name that was last successfully opened. More...

XsensResultValue	getLastResult (void) const
	Return the error code of the last operation. More...

uint32_t	getTimeout (void) const
	Return the current timeout value. More...

bool	isOpen (void) const
	Return whether the communication port is open or not. More...

XsensResultValue	open (const char *portName, const uint32_t baudRate=CMT_DEFAULT_BAUD_RATE, uint32_t readBufSize=CMT_DEFAULT_READ_BUFFER_SIZE, uint32_t writeBufSize=CMT_DEFAULT_WRITE_BUFFER_SIZE)
	Open a communcation channel to the given serial port name. More...

XsensResultValue	open (const uint32_t portNumber, const uint32_t baudRate=CMT_DEFAULT_BAUD_RATE, uint32_t readBufSize=CMT_DEFAULT_READ_BUFFER_SIZE, uint32_t writeBufSize=CMT_DEFAULT_WRITE_BUFFER_SIZE)
	Open a communication channel to the given COM port number. More...

XsensResultValue	readData (const uint32_t maxLength, uint8_t data, uint32_t length=NULL)
	Read data from the serial port and put it into the data buffer. More...

XsensResultValue	setCallbackFunction (CmtCallbackSelector tp, int32_t instance, CmtCallbackFunction func, void *param)
	Set the callback function for when bytes have been received. More...

XsensResultValue	setTimeout (const uint32_t ms=CMT1_DEFAULT_TIMEOUT)
	Set the default timeout value to use in blocking operations. More...

XsensResultValue	waitForData (const uint32_t maxLength, uint8_t data, uint32_t length=NULL)
	Wait for data to arrive or a timeout to occur. More...

XsensResultValue	writeData (const uint32_t length, const uint8_t data, uint32_t written)
	Write the data to the serial port. More...

Protected Attributes
uint32_t	m_baudrate
	The baudrate that was last set to be used by the port. More...

uint32_t	m_endTime
	The time at which an operation will end in ms, used by several functions. More...

bool	m_isOpen
	Indicates if the port is open or not. More...

XsensResultValue	m_lastResult
	The last result of an operation. More...

uint8_t	m_port
	The opened COM port nr. More...

char	m_portname [257]

uint32_t	m_timeout

DCB	m_commState
	Stored settings about the serial port. More...

HANDLE	m_handle
	The serial port handle. More...

Private Member Functions
	Cmt1s (const Cmt1s &ref)
	This object cannot be copied, so this function is not implemented. More...

Private Attributes
CmtCallbackFunction	m_onBytesReceived
	The bytes received function. More...

int32_t	m_onBytesReceivedInstance
	Custom, user supplied parameter for the OnBytesReceived callback function, passed as the first argument. More...

void *	m_onBytesReceivedParam
	Custom, user supplied parameter for the OnBytesReceived callback function, passed as the last argument. More...

Constructor & Destructor Documentation

◆ Cmt1s() [1/2]

xsens::Cmt1s::Cmt1s ( const Cmt1s & ref )

private

This object cannot be copied, so this function is not implemented.

◆ Cmt1s() [2/2]

xsens::Cmt1s::Cmt1s ( )

Default constructor, initializes all members to their default values.

Definition at line 184 of file cmt1.cpp.

References CMT1_DEFAULT_TIMEOUT, m_baudrate, m_endTime, m_isOpen, m_lastResult, m_port, m_timeout, and XRV_OK.

◆ ~Cmt1s()

xsens::Cmt1s::~Cmt1s ( )

Destructor, de-initializes, frees memory allocated for buffers, etc.

Definition at line 202 of file cmt1.cpp.

References close().

Member Function Documentation

◆ close()

XsensResultValue xsens::Cmt1s::close ( void )

Close the serial communication port.

Definition at line 209 of file cmt1.cpp.

References mrpt::system::os::fclose(), m_endTime, m_handle, m_isOpen, m_lastResult, XRV_NOPORTOPEN, and XRV_OK.

Referenced by xsens::Cmt2s::close(), and ~Cmt1s().

◆ escape()

XsensResultValue xsens::Cmt1s::escape	(	const CmtControlLine	mask,
		const CmtControlLine	state
	)

Manipulate the Serial control lines.

The function manipulates the serial control lines that are indicated by the mask parameter. Note that only the DTR and RTS lines can be set by win32.

Parameters

mask	Indicates which lines are to be manipulated and which should be left alone.
state	Contains the new state of the control lines.

Definition at line 249 of file cmt1.cpp.

References CMT_CONTROL_DTR, CMT_CONTROL_RTS, m_handle, m_isOpen, m_lastResult, status, XRV_ERROR, XRV_NOPORTOPEN, and XRV_OK.

◆ flushData()

XsensResultValue xsens::Cmt1s::flushData ( void )

Flush all data to be transmitted / received.

This function tries to send and receive any remaining data immediately and does not return until the buffers are empty.

Definition at line 308 of file cmt1.cpp.

References m_endTime, m_handle, m_lastResult, and XRV_OK.

Referenced by xsens::Cmt3::gotoConfig().

◆ getBaudrate()

uint32_t xsens::Cmt1s::getBaudrate ( void ) const

inline

Return the baudrate that is currently being used by the port.

Definition at line 121 of file cmt1.h.

References m_baudrate.

Referenced by xsens::Cmt2s::getBaudrate().

◆ getHandle()

HANDLE xsens::Cmt1s::getHandle ( void ) const

inline

Return the handle of the port.

Definition at line 123 of file cmt1.h.

References m_handle.

◆ getLastResult()

XsensResultValue xsens::Cmt1s::getLastResult ( void ) const

inline

Return the error code of the last operation.

Definition at line 129 of file cmt1.h.

References m_lastResult.

◆ getPortName()

void xsens::Cmt1s::getPortName ( char * portname ) const

inline

Retrieve the port name that was last successfully opened.

Definition at line 127 of file cmt1.h.

References m_portname, and mrpt::system::os::sprintf().

Referenced by xsens::Cmt2s::getPortName().

◆ getPortNr()

uint8_t xsens::Cmt1s::getPortNr ( void ) const

inline

Retrieve the port number that was last successfully opened.

Definition at line 125 of file cmt1.h.

References m_port.

Referenced by xsens::Cmt2s::close(), xsens::Cmt2s::getPortNr(), xsens::Cmt3::gotoConfig(), xsens::Cmt3::gotoMeasurement(), xsens::Cmt3::initBus(), xsens::Cmt2s::readMessage(), xsens::Cmt2s::waitForMessage(), and xsens::Cmt2s::writeMessage().

◆ getTimeout()

uint32_t xsens::Cmt1s::getTimeout ( void ) const

inline

Return the current timeout value.

Definition at line 131 of file cmt1.h.

References m_timeout.

◆ isOpen()

bool xsens::Cmt1s::isOpen ( void ) const

inline

Return whether the communication port is open or not.

Definition at line 133 of file cmt1.h.

References m_isOpen.

Referenced by xsens::Cmt2s::isOpen().

◆ open() [1/2]

XsensResultValue xsens::Cmt1s::open	(	const char *	portName,
		const uint32_t	baudRate = `CMT_DEFAULT_BAUD_RATE`,
		uint32_t	readBufSize = `CMT_DEFAULT_READ_BUFFER_SIZE`,
		uint32_t	writeBufSize = `CMT_DEFAULT_WRITE_BUFFER_SIZE`
	)

Open a communcation channel to the given serial port name.

The port is automatically initialized to the given baudrate. If the baudrate is set to 0, the baud rate is automatically detected. If possible.

Definition at line 322 of file cmt1.cpp.

References CMT1LOG, FALSE, m_baudrate, m_commState, m_endTime, m_handle, m_isOpen, m_lastResult, m_port, m_portname, m_timeout, MRPT_UNUSED_PARAM, setTimeout(), mrpt::system::os::sprintf(), XRV_ALREADYOPEN, XRV_ERROR, XRV_INPUTCANNOTBEOPENED, and XRV_OK.

Referenced by xsens::Cmt2s::open(), and open().

◆ open() [2/2]

XsensResultValue xsens::Cmt1s::open	(	const uint32_t	portNumber,
		const uint32_t	baudRate = `CMT_DEFAULT_BAUD_RATE`,
		uint32_t	readBufSize = `CMT_DEFAULT_READ_BUFFER_SIZE`,
		uint32_t	writeBufSize = `CMT_DEFAULT_WRITE_BUFFER_SIZE`
	)

Open a communication channel to the given COM port number.

The port is automatically initialized to the given baud rate. If the baudrate is set to 0, the baud rate is automatically detected. If possible.

Definition at line 462 of file cmt1.cpp.

References open(), and mrpt::system::os::sprintf().

◆ readData()

XsensResultValue xsens::Cmt1s::readData	(	const uint32_t	maxLength,
		uint8_t *	data,
		uint32_t *	length = `NULL`
	)

Read data from the serial port and put it into the data buffer.

This function reads as much data as possible from the com port (non-blocking) and put as much data as will fit into the data buffer. Any excess data is stored in the m_readBuffer member variable. If there was enough data in m_readBuffer to fulfill the request, the data parameter is first filled and the port is polled afterwards.

Parameters

maxLength	The maximum amount of data read.
data	Pointer to a buffer that will store the received data.
length	The number of bytes placed into `data`.

Definition at line 478 of file cmt1.cpp.

References CMT1LOG, CMT_CALLBACK_ONBYTESRECEIVED, CMT_MAX_FILENAME_LENGTH, CMTLOG, mrpt::system::os::fopen(), m_baudrate, CmtBinaryData::m_data, m_handle, m_isOpen, m_lastResult, m_onBytesReceived, m_onBytesReceivedInstance, m_onBytesReceivedParam, m_port, CmtBinaryData::m_portNr, CmtBinaryData::m_size, mrpt::system::os::memcpy(), mrpt::system::os::sprintf(), XRV_ERROR, XRV_NOPORTOPEN, and XRV_OK.

Referenced by xsens::Cmt2s::readMessage(), waitForData(), and xsens::Cmt2s::waitForMessage().

◆ setCallbackFunction()

XsensResultValue xsens::Cmt1s::setCallbackFunction	(	CmtCallbackSelector	tp,
		int32_t	instance,
		CmtCallbackFunction	func,
		void *	param
	)

Set the callback function for when bytes have been received.

Definition at line 531 of file cmt1.cpp.

References CMT_CALLBACK_ONBYTESRECEIVED, m_lastResult, m_onBytesReceived, m_onBytesReceivedInstance, m_onBytesReceivedParam, XRV_INVALIDPARAM, and XRV_OK.

◆ setTimeout()

XsensResultValue xsens::Cmt1s::setTimeout ( const uint32_t ms = CMT1_DEFAULT_TIMEOUT )

Set the default timeout value to use in blocking operations.

This function sets the value of m_timeout. There is no infinity value. The value 0 means that all blocking operations now become polling (non-blocking) operations. If the value is set to or from 0, the low-level serial port settings may be changed in addition to the m_timeout value.

Definition at line 545 of file cmt1.cpp.

References CMT1LOG, m_commState, m_handle, m_isOpen, m_lastResult, m_timeout, and XRV_OK.

Referenced by open(), and xsens::Cmt2s::setTimeout().

◆ waitForData()

XsensResultValue xsens::Cmt1s::waitForData	(	const uint32_t	maxLength,
		uint8_t *	data,
		uint32_t *	length = `NULL`
	)

Wait for data to arrive or a timeout to occur.

The function waits until maxLength data is available or until a timeout occurs. The function returns success if data is available or XsensResultValue::TIMEOUT if a timeout occurred. A timeout value of 0 indicates that the default timeout stored in the class should be used.

Definition at line 590 of file cmt1.cpp.

References CMT1LOG, xsens::getTimeOfDay(), m_lastResult, m_timeout, readData(), XRV_OK, and XRV_TIMEOUT.

◆ writeData()

XsensResultValue xsens::Cmt1s::writeData	(	const uint32_t	length,
		const uint8_t *	data,
		uint32_t *	written
	)

Write the data to the serial port.

The function writes the given data to the connected COM port. The default timeout is respected in this operation.

Definition at line 618 of file cmt1.cpp.

References CMT_MAX_FILENAME_LENGTH, mrpt::system::os::fopen(), m_baudrate, m_handle, m_isOpen, m_lastResult, m_port, mrpt::system::os::sprintf(), XRV_ERROR, XRV_NOPORTOPEN, and XRV_OK.

Referenced by xsens::Cmt2s::writeMessage().

Member Data Documentation

◆ m_baudrate

uint32_t xsens::Cmt1s::m_baudrate

protected

The baudrate that was last set to be used by the port.

Definition at line 75 of file cmt1.h.

Referenced by Cmt1s(), getBaudrate(), open(), readData(), and writeData().

◆ m_commState

DCB xsens::Cmt1s::m_commState

protected

Stored settings about the serial port.

Definition at line 91 of file cmt1.h.

Referenced by open(), and setTimeout().

◆ m_endTime

uint32_t xsens::Cmt1s::m_endTime

protected

The time at which an operation will end in ms, used by several functions.

Definition at line 77 of file cmt1.h.

Referenced by close(), Cmt1s(), flushData(), and open().

◆ m_handle

HANDLE xsens::Cmt1s::m_handle

protected

The serial port handle.

Definition at line 92 of file cmt1.h.

Referenced by close(), escape(), flushData(), getHandle(), open(), readData(), setTimeout(), and writeData().

◆ m_isOpen

bool xsens::Cmt1s::m_isOpen

protected

Indicates if the port is open or not.

Definition at line 79 of file cmt1.h.

Referenced by close(), Cmt1s(), escape(), isOpen(), open(), readData(), setTimeout(), and writeData().

◆ m_lastResult

XsensResultValue xsens::Cmt1s::m_lastResult

mutableprotected

The last result of an operation.

Definition at line 81 of file cmt1.h.

Referenced by close(), Cmt1s(), escape(), flushData(), getLastResult(), open(), readData(), setCallbackFunction(), setTimeout(), waitForData(), and writeData().

◆ m_onBytesReceived

CmtCallbackFunction xsens::Cmt1s::m_onBytesReceived

private

The bytes received function.

This function is automatically called every time binary data is read from the connected COM port.

Definition at line 68 of file cmt1.h.

Referenced by readData(), and setCallbackFunction().

◆ m_onBytesReceivedInstance

int32_t xsens::Cmt1s::m_onBytesReceivedInstance

private

Custom, user supplied parameter for the OnBytesReceived callback function, passed as the first argument.

Definition at line 70 of file cmt1.h.

Referenced by readData(), and setCallbackFunction().

◆ m_onBytesReceivedParam

void* xsens::Cmt1s::m_onBytesReceivedParam

private

Custom, user supplied parameter for the OnBytesReceived callback function, passed as the last argument.

Definition at line 72 of file cmt1.h.

Referenced by readData(), and setCallbackFunction().

◆ m_port

uint8_t xsens::Cmt1s::m_port

protected

The opened COM port nr.

Definition at line 83 of file cmt1.h.

Referenced by Cmt1s(), getPortNr(), open(), readData(), and writeData().

◆ m_portname

char xsens::Cmt1s::m_portname[257]

protected

Definition at line 84 of file cmt1.h.

Referenced by getPortName(), and open().

◆ m_timeout

uint32_t xsens::Cmt1s::m_timeout

protected

The default timeout value to use during blocking operations. A value of 0 means that all operations become non-blocking.

Definition at line 88 of file cmt1.h.

Referenced by Cmt1s(), getTimeout(), open(), setTimeout(), and waitForData().

Detailed Description

Public Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Constructor & Destructor Documentation

◆ Cmt1s() [1/2]

◆ Cmt1s() [2/2]

◆ ~Cmt1s()

Member Function Documentation

◆ close()

◆ escape()

◆ flushData()

◆ getBaudrate()

◆ getHandle()

◆ getLastResult()

◆ getPortName()

◆ getPortNr()

◆ getTimeout()

◆ isOpen()

◆ open() [1/2]

◆ open() [2/2]

◆ readData()

◆ setCallbackFunction()

◆ setTimeout()

◆ waitForData()

◆ writeData()

Member Data Documentation

◆ m_baudrate

◆ m_commState

◆ m_endTime

◆ m_handle

◆ m_isOpen

◆ m_lastResult

◆ m_onBytesReceived

◆ m_onBytesReceivedInstance

◆ m_onBytesReceivedParam

◆ m_port

◆ m_portname

◆ m_timeout