CCANBusReader.h

Go to the documentation of this file.

/* +------------------------------------------------------------------------+
   |                     Mobile Robot Programming Toolkit (MRPT)            |
   |                          http://www.mrpt.org/                          |
   |                                                                        |
   | Copyright (c) 2005-2018, Individual contributors, see AUTHORS file     |
   | See: http://www.mrpt.org/Authors - All rights reserved.                |
   | Released under BSD License. See details in http://www.mrpt.org/License |
   +------------------------------------------------------------------------+ */
#ifndef CCANBusReader_H
#define CCANBusReader_H
 
#include <mrpt/obs/CObservationCANBusJ1939.h>
#include <mrpt/system/COutputLogger.h>
#include <mrpt/hwdrivers/CGenericSensor.h>
#include <mrpt/comms/CSerialPort.h>
 
namespace mrpt::hwdrivers
{
/** This "software driver" implements the communication protocol for interfacing
 * a SICK LMS 2XX laser scanners through a standard RS232 serial port (or a
 * USB2SERIAL converter).
  *   The serial port is opened upon the first call to "doProcess" or
 * "initialize", so you must call "loadConfig" before
  *   this, or manually call "setSerialPort". Another alternative is to call the
 * base class method C2DRangeFinderAbstract::bindIO,
  *   but the "setSerialPort" interface is probably much simpler to use.
  *
  *   For an example of usage see the example in
 * "samples/SICK_laser_serial_test".
  *   See also the example configuration file for rawlog-grabber in
 * "share/mrpt/config_files/rawlog-grabber".
  *
  *  \code
  *  PARAMETERS IN THE ".INI"-LIKE CONFIGURATION STRINGS:
  * -------------------------------------------------------
  *   [supplied_section_name]
  *   COM_port_WIN = COM1   // Serial port to connect to
  *   COM_port_LIN = ttyS0
  *
  *   COM_baudRate = 38400 // Possible values: 9600 (default), 38400, 5000000
  *   mm_mode      = 1/0   // 1: millimeter mode, 0:centimeter mode (Default=0)
  *   FOV          = 180   // Field of view: 100 or 180 degrees (Default=180)
  *   resolution   =  50   // Scanning resolution, in units of 1/100 degree.
 * Valid values: 25,50,100 (Default=50)
  *
  *
  *   pose_x=0.21   // Laser range scaner 3D position in the robot (meters)
  *   pose_y=0
  *   pose_z=0.34
  *   pose_yaw=0    // Angles in degrees
  *   pose_pitch=0
  *   pose_roll=0
  *  \endcode
  *
  * \sa C2DRangeFinderAbstract
  * \ingroup mrpt_hwdrivers_grp
  */
class CCANBusReader : public mrpt::system::COutputLogger, public CGenericSensor
{
    DEFINE_GENERIC_SENSOR(CCANBusReader)
 
   private:
    /** Tries to open the com port and setup all the LMS protocol. Returns true
     * if OK or already open. */
    bool tryToOpenComms(std::string* err_msg = nullptr);
    bool waitContinuousSampleFrame(
        uint8_t& out_prio, uint8_t& out_pdu_format, uint8_t& out_pdu_spec,
        uint8_t& out_src_address, uint8_t& out_data_length, uint16_t& out_pgn,
        std::vector<uint8_t>& out_data, std::vector<char>& out_raw_frame);
 
    /** Sends the specified speed to the CAN Converter. */
    bool sendCANBusReaderSpeed();
    /** Opens the CAN Channel */
    bool CANBusOpenChannel();
    /** Closes the CAN Channel */
    bool CANBusCloseChannel();
    bool CANBusAutoPoll();
    bool CANBusPoll();
    bool CANBusX1();
    bool setupSerialComms();
    bool queryVersion(bool printOutVersion = false);
    bool waitACK(uint16_t timeout_ms);
    bool waitForVersion(uint16_t timeout, bool printOutVersion = false);
    bool waitIncomingFrame(uint16_t timeout);
 
    bool sendCommandToCANReader(
        const uint8_t* cmd, const uint16_t cmd_len, bool wait = true);
 
    uint8_t m_received_frame_buffer[2000];
 
    /** If set to non-empty, the serial port will be attempted to be opened
     * automatically when this class is first used to request data from the
     * laser. */
    std::string m_com_port;
    /** Will be !=nullptr only if I created it, so I must destroy it at the end.
     */
    mrpt::comms::CSerialPort* m_mySerialPort;
    /** Baudrate: 9600, 38400, 500000 */
    int m_com_baudRate;
    /** Default = 1 */
    unsigned int m_nTries_connect;
    unsigned int m_nTries_current;
    int m_canbus_speed;
    bool m_canreader_timestamp;  // for future work
    bool m_CANBusChannel_isOpen;  // if the can bus channel is open or not
 
   protected:
    /** See the class documentation at the top for expected parameters */
    void loadConfig_sensorSpecific(
        const mrpt::config::CConfigFileBase& configSource,
        const std::string& iniSection);
 
   public:
    /** Constructor  */
    CCANBusReader();
 
    /** Destructor  */
    virtual ~CCANBusReader();
 
    /** Changes the serial port to connect to (call prior to 'doProcess'), for
     * example "COM1" or "ttyS0".
      *  This is not needed if the configuration is loaded with "loadConfig".
      */
    void setSerialPort(const std::string& port) { m_com_port = port; }
    /** \sa setSerialPort */
    std::string getSerialPort() const { return m_com_port; }
    /** Changes the serial port baud rate (call prior to 'doProcess'); valid
     * values are 9600,38400 and 500000.
      *  This is not needed if the configuration is loaded with "loadConfig".
      *  \sa getBaudRate */
    void setBaudRate(int baud) { m_com_baudRate = baud; }
    /** \sa setBaudRate */
    int getBaudRate() const { return m_com_baudRate; }
    /** Enables/Disables the addition of a timestamp according to the arrival
     * time to the converter (default=false)
      *  (call prior to 'doProcess') This is not needed if the configuration is
     * loaded with "loadConfig".
      */
    void setCANReaderTimeStamping(bool setTimestamp = false)
    {
        m_canreader_timestamp = setTimestamp;
    }
    bool getCANReaderTimeStamping() { return m_canreader_timestamp; }
    /** Sets the CAN reader speed when connecting to the CAN Bus
    */
    void setCANReaderSpeed(const unsigned int speed) { m_canbus_speed = speed; }
    unsigned int getCANReaderSpeed() { return m_canbus_speed; }
    /** If performing several tries in ::initialize(), this is the current try
     * loop number. */
    unsigned int getCurrentConnectTry() const { return m_nTries_current; }
    /** Specific laser scanner "software drivers" must process here new data
     * from the I/O stream, and, if a whole scan has arrived, return it.
      *  This method will be typically called in a different thread than other
     * methods, and will be called in a timely fashion.
      */
    void doProcessSimple(
        bool& outThereIsObservation,
        mrpt::obs::CObservationCANBusJ1939& outObservation,
        bool& hardwareError);
 
    /** Set-up communication with the laser.
      *  Called automatically by rawlog-grabber.
      *  If used manually, call after "loadConfig" and before "doProcess".
      *
      *  In this class this method does nothing, since the communications are
     * setup at the first try from "doProcess" or "doProcessSimple".
      */
    void initialize();
 
    void doProcess();
 
};  // End of class
 
}
#endif